Uncategorized

Day 133 Brew Day! Citra Saison with Harvested Yeast Starter

Setting up for brewing

Setting up for brewing

This was an uncharacteristic brew day for me. I usually don’t brew on weekdays. Certainly not Mondays. But the starter I had hoped to pitch in a Citra Saison pushed me back a day. I have never harvested yeast and never made a starter before now and I was afraid that the starter was going to be too weak. I worked out a boost for the starter (see previous post) and moved the brew back a day.

After I got everything all set up and ready to go, I got my BIAB (Brew In A Bag) in place and heated my strike water, 6 gallons.  The goal was 150F…water went to 154F and I mashed in. The water only dropped 1/2 degree though. I turned off the heat and made a run for ice. When I returned, the temp was 150.2F. Over the next 45 minutes, I tried my best to maintain the target temperature of 150F; however, it was probably more consistently in the 153F range.

After the BIAB (Boil In A Bag) steep and "sparge"

After the BIAB (Boil In A Bag) steep and “sparge”

Here is where I will talk about my changes to the original recipe that I found online. First of all, I decided to do Pale Malt 2 row, instead of Pilsner. Two reasons: sale on Pale and 60 minute boil instead of 90 minute. (Some recommend Pilsner boil for 90 to reduce chance of off flavors.) Next, I added 1 teaspoon of Irish Moss at 15 minutes left in the boil to aid clarity. I also realized that I had forgotten to buy 1 pound of Belgian Clear Candi Syrup…made a run to the closest brew shop, only to find that they are closed on Mondays. Aaaargh! So, I substituted a pound of raw North Carolina honey, instead (at 10 minutes left in the boil). I am also planning on adding a dry hop step to secondary. The recipe calls for Citra hops to be added 1/2 oz at 30 minutes and 1/2 oz at 10 minutes left in the boil. I am a big Citra fan, so I am going to add an ounce in secondary.

Okay, back to the procedures: After the 1 hour mash in, I did my usual “tea bag” style dunking and draining of the bag, using a large pizza screen over the pot for support. I then set up a bottling bucket with 2 gallons of sparge water at about 150F and used the spigot with some hose on it to do an improvised sparge. I’ve used this method that, as far as I know, I made up, a few times and I think it helps a little. This left me with a rather full kettle, so the boil was a challenge and had to be monitored pretty carefully.

The pizza screen was helpful in the tea bag style sparging and in helping keep bugs and debris out.

The pizza screen was helpful in the tea bag style sparging and in helping keep bugs and debris out.

I set timers for my additions and all of that went well. Did my usual ice bath chill and managed to get the temperature of the wort down to about 90F, pretty quickly…good temperature for Belle Saison yeast.

Now, I wanted to use my glass carboy for primary fermentation, so I could have a visual on activity. The problem is getting 7 gallons of wort from a stock pot into a heavy glass 6 gallon carboy using a funnel. I struggled and spilled a bit, trying to figure out a grip and pouring into a small target that filled quickly. I could see that wasn’t going to cut it, so I poured about 3/4 of the wort into the bottling bucket I had used for the sparging, and then went through the spigot and hose into the carboy. Obviously, I was going to have too much wort, so, rather than toss it, I grabbed and sanitized a one gallon carboy and put the rest of the wort into it.

I used my oxygen tank to oxygenate the big carboy for two minutes and the little one for one minute. Between the refractometer reading of 1.048 and the hydrometer reading, corrected for temperature to 1.044, I’m  going to estimate 1.046 OG.* Rather than try to decant my yeast starter, I decided to swirl the flask to mix it well and pitch the whole thing…guesstimating some for the smaller batch. The starter wort used pale DME (Dry Malt Extract), so it shouldn’t hurt the flavor of the beer. The recipe doesn’t give a projected FG, but Belle Saison is pretty aggressive, so I’m betting on around 1.002 for the big batch. So, maybe a 5.78% ABV? I would be happy with that.

Here's the volume of wort I wound up with.

Here’s the volume of wort I wound up with and my flask of starter yeast.

I have no clue what to expect for the one gallon batch, because I’m going to add one pound of fresh cherries to secondary fermentation, rather than dry hopping it, and the sugar in the cherries will surely kick fermentation back into gear. I currently have the whole cherries in the freezer with some vodka. When it comes time to rack the small batch, I’ll crush the cherries into the vodka a little to release some juice and add it all. I’ll probably use a 2 gallon bucket that I use for ciders to do the small batch secondary, so I have a wide opening with which to work.

The recipe calls for a week each for both primary and secondary; however, my Hi-Nelson Saison needed a little over two weeks for primary and then a week for secondary. And the small batch may go longer in secondary. I’ll probably even rack the small batch to a tertiary stage to clarify once it’s off the fruit. Probably back into a glass carboy again so I can judge the clarity.

The big question mark is whether my yeast starter was going to work. The yeast was pitched at 3:15 p.m. and the carboys were set on a heating pad, on the lowest setting. At 6:30, there was no activity evident and the glass felt pretty cool.

Carboys on the heating pad.

Carboys on the heating pad. (Beside some Hi-Nelson Saison with Hibiscus and some Diet Root Beer (Truvia)

I upped the heating pad to medium and wrapped the carboys in a “Space Blanket”. By 9:30 p.m., they were both chugging along in the airlocks…not violently, but good, frequent bubbles every second or two. Success!!! Woo hoo!!!

Heating pad AND Space Blanket...now we're chugging!

Heating pad AND Space Blanket…now we’re chugging!

I cold crashed the hydrometer sample just to see what it looks like and how it tastes at this stage. Obviously malty and sweet at this point, but it seems like it will be nice and clean, light bitterness and the hops should shine through on the main batch and the Belle Saison should add a little spice and funk. The little cherry batch should be really interesting!

Hydrometer sample, cold crashed and easier to get a read. And a taste for evaluation.

Hydrometer sample, cold crashed and easier to get a read. And a taste for evaluation.

*I also let this sample come to room temperature and took another hydrometer reading. at 74.2F and 1.046, adjusted to 1.047, so that will be my new OG to go with. I read the hydrometer with no contacts or glasses and it was much easier to get a good read, so I feel confident with that figure. (An additional refractometer reading, of course, calls it 1.048, so…whatever!) Could be around 6% ABV…anywhere in that  5.75 to 6.05% range is close enough.

For the original version of the recipe, go to this link or cut and paste into your browser:

http://www.danielshomebrew.blogspot.com/2014/01/citra-saison.html

Always give credit where due!

Update: Okay…the following morning, the airlocks were fouled. I quickly set up blow offs and the yeast is going at it, big time! Definitely had enough yeast!

 

Advertisements
Standard

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s