Uncategorized

Fluffernutter Sammie Stout Update

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Update 5/24/2016: An unexpected little run of cooler temperatures had me worried that the beer was not fermenting. I know it did for a couple of days, albeit a bit slowly…never really started “chugging”, but going. Then the cool weather, and my little fermentation chamber is outside. It is only able to cool, not warm, so this could be a problem. Since the overnight low last night was going into the mid to lower 50’s, I decided to bring the carboy inside.

I took a sample and did a temperature and hydrometer reading. The temp was 62.5, so it wasn’t terrible…a little under optimum range, but should not be low enough to have caused any harm. The hydrometer has the specific gravity at 1.030, so it definitely was fermenting. That’s good! Adjusting for the lactose, I think it will likely only go to 1.028 or so.

Hydrometer sample for evaluation...specific gravity, temperature and flavor.

Hydrometer sample for evaluation…specific gravity, temperature and flavor.

The flavor of the sample has my hopes up! The color may be a tad light, but it’s a little darker than the sample shows, because of the camera flash and the particles had not settled out yet. I could definitely taste the peanut flavor, especially in the finish. Nice malty sweetness. After the sample chilled overnight, the peanut flavor is more muted. With that and the consensus from others that the peanut flavor will start fading after a couple of months in the bottles, I do plan to add more peanut powder to secondary via boiling it with water and cooling it…probably a gallon and then racking onto it and the vanilla beans. I’m going to skip the marshmallow Fluff in secondary and rely on the vanilla for that flavor, so I’m not adding much more fermentable sugars. I may try adding some to the boil in a future batch, but not this time. I have a feeling that this beer’s flavor will improve as it loses some of its chill, after pouring.

The temperature on the carboy strip thermometer reads around 66-68F, so I’ll be putting it back in the fermentation chamber later today.

Advertisements
Standard

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s