Uncategorized

Bottling and Corking Muscadine-Blueberry Wine

IMG_20151212_213927089

First bottle of blueberry-muscadine wine. (I adjusted it a little more after photo to be flush with top of bottle.)

I have 5 gallons of blueberry-muscadine wine that I started in late August of this year (2015). You can read through the previous posts for the process. My previous wine attempt was a straight muscadine wine that was about 2 gallons and just bottled it in beer bottles. So this is my second wine, but, since I had 5 gallons, I decided to go ahead and put it in actual wine bottles with corks!

5 gallon carboy of blueberry-muscadine wine.

5 gallon carboy of blueberry-muscadine wine.

First, since my brief trend is to make wine once a year, I really didn’t want to invest in a corker. Unfortunately, I do not know anyone that has one I could borrow, either. I do, however, have a friend that had the valuable knowledge that a local home brew shop rents a floor model corker for $5/day! I stopped by today and bought 2 cases of green wine bottles (total of 24 bottles), and a 30 count bag of corks.

Floor model wine bottle corker. Easy to use and adjust.

Floor model wine bottle corker. Easy to use and adjust.

I bought #9 corks, because they are for wines expected to be around something like 5 to 7 years. The #7 and #8 corks were for shorter term storage. The blueberry-muscadine wine is fairly light body and about medium on the dry scale…maybe a little more towards dry. I don’t expect it to last for many years, but there’s a chance a few bottles may wind up getting stashed and discovered sometime in the future…so, better to have a little excess time.

I pulled a sample of the wine for the hydrometer test. Checked the temperature. I got an FG (final gravity) of 0.993. The OG (original gravity) of 1.111 means that we have a wine with 15.49% ABV. Really? It’s hidden pretty well! Pretty color, too, by the way.

Hydrometer sample.

Hydrometer sample.

I went ahead and rinsed and sanitized the bottles and my tubing and bottling wand. I researched cork preparation a little and the consensus seems to be that the type of cork I’m using does not need any soaking, boiling, sanitizing, etc. I filled a test bottle and tried the corker. Very easy. And there is a little threaded washer that can fine-tune the depth that the cork is pushed. It was simple to adjust and get the cork flush. I got a yield of exactly 24 bottles,

First of two cases.

First of two cases.

with just a little extra for enjoying tonight.

Nice color...and little sample for the winemaker.

Nice color…and little sample for the winemaker.

I have to say, it’s very satisfying to see my wine in real deal, bona fide wine bottles! Now…how long before I start giving them away? Just a couple weeks until Christmas…maybe hang on to most of them for a year? Oh…and I need to look into labeling. I mean it IS my first wine in corked bottles, after all!

 

Advertisements
Standard
Uncategorized

Day 166 Bottling Muscadine Wine

Muscadine wine...nice and clear.

Muscadine wine…nice and clear.

Finally bottled my muscadine wine! I started with grapes that I foraged from wild vines and now I have my first wine in the bottles! The wine has been bulk aging  in two 1 gallon carboys and one 1/2 gallon carboy.

Bulk aging the wine.

Bulk aging the wine.

I combined them all into a bottling bucket to make sure the wine is all consistently blended and to facilitate the bottling.

Transferred to a bottling bucket.

Transferred to a bottling bucket.

I used the Brewer’s Friend online bottling calculator to figure out how many bottles I would need…calculation is twenty-six 12 oz bottles, plus 8 oz left over, which would be good for a hydrometer reading and sample.  So, I sanitized 26 bottles and all the bottling equipment and supplies.

Sanitized equipment and bottles.

Sanitized equipment and bottles.

I’m using oxygen absorbing caps for the wine bottling. I have read that a lot of homebrewers think they are useless for beer, but this is wine. Some mead makers think they are absolutely worthwhile. The thing is, the caps are recommended for things that are going to be bottled for 2 years or more. Most beers, other that barleywine, aren’t aged more than a year. There are a few exceptions. Anyway, I’ve decided to use them…several bottles of my wine may very well be around for a couple of years or more.

The clarity on the wine is beautiful and the color is a nice blush. The FG is 0.991 and the OG was 1.113, so we have a 16.01% ABV!

Taking the hydrometer reading.

Taking the hydrometer reading…look at the clarity!

The aroma and flavor are definitely that of a young red wine with a heavy amount of alcohol, but it certainly is not your typical North Carolina sweet muscadine wine.

Pretty!

Pretty!

I can definitely drink the sample, but I probably won’t open a bottle for at least a year and probably longer for most of them. The bottling calculator was spot-on, by the way. I filled exactly 26 bottles.

Filling the bottles.

Filling the bottles.

I’m hoping they will mellow and become something special with time. But this is my first real wine, so it’s pretty special to me already!

Twenty-six 12 oz bottles of wine...ready for storage.

Twenty-six 12 oz bottles of wine…ready for storage.

Standard