Uncategorized

Bottled Belgo Paleo

Bottling!

Ready for bottling!

I just finished bottling the Belgo Paleo Belgian Pale Ale and I wound up with 42-12 oz bottles. I thought I had more corn sugar on hand to prime with, but I only had 3/4 oz. So, I primed with table sugar. The recommended amount for a Belgian Ale is 1.9 to 2.4 atmospheres.With my history of overcarbonating, I looked at the lower end of the scale and the amount of sugar recommended is 2-1/2 oz; I went with a scant 2-1/8 oz. Always feels like a bit of a crapshoot, but we’ll see how THAT works out.

Bottling bucket.

Bottling bucket.

I did get a hydrometer sample again and the FG is confirmed at 1.015. My OG was almost dead-on at 1.060 (recipe says 1.059), but I just couldn’t get to the projected 1.009 FG. So, instead of 6.56%, I wound up with a respectable 5.91% ABV.

Nice color.

Nice color.

Flash makes it hard to see the line is actually 1.014...with temp correction = 1.015 FG

Flash makes it hard to see the line is actually 1.014…with temp correction = 1.015 FG

In an attempt to lessen the chances of overcarbonation, I cleaned all my containers and equipment with a solution of super washing soda from Arm&Hammer, rinsed and sanitized with Starsan. I ran the bottles through the dishwasher AND sanitized with Starsan. Keeping my fingers crossed!

Advertisements
Standard
Uncategorized

Brew Day Belgo Paleo

Ready to Brew!

Ready to Brew!

Brew Day! I’m actually writing this on the day after, but it was a long day. I had to help prepare for my older daughter’s baby shower and, after brewing and planting several things in the garden, I had to go help with the clean up. I was sore and tired last night!

First, I want to address the fact that I have had an ongoing problem with overcarbonation in several of my brews. Most have been darker beers…stout, porter, Scottish ale; but that may not necessarily have anything to do with it. I’ve tried backing down on priming sugar, extending the fermentation period, careful sanitizing procedures. I have been wondering if maybe the equipment I’m using or the bottles may need replacing or heavy duty cleaning, rather than rinsing and sanitizing. Before this brew, I soaked EVERYTHING in a solution of Arm & Hammer Super Washing Soda…carboy, buckets, utensils, hoses, siphon, airlocks and stoppers. Before I bottle, I will soak the bottles in the same solution, run them through the dishwasher (including heated drying cycle), and sanitizing. If this batch winds up overcarbing, I will have NO clue what to try next. Keeping my fingers crossed.

The recipe I brewed is a Belgian Pale Ale called Belgo Paleo and it sounds pretty good. It uses Green Bullet hops for buttering, Tettnang at 30 minutes and Saaz at 15 minutes and dry hop. The yeast is a packet of dry Safbrew Abbaye.

Pellet hops

Pellet hops

I followed my usual brew day procedures, with one exception: I used my new stainless steel wort chiller for the first time!

New stainless steel wort chiller

New stainless steel wort chiller

I didn’t have to buy 8 bags of ice this time! I set up the chiller with hoses and kept it in a bucket of sanitizer until ready to use. I put the chiller in the kettle for the last 15 minutes of the boil, to sanitize it.

Unfortunately, I can’t seem to manage leak-proof connections and a little water sprayed into the wort. It was right after flame-out, and I’m hoping it didn’t ruin the batch. I wrapped the connection in paper towels and the dripping happened away from the kettle, instead of into it. The chiller worked like a champ and my wort was down to pitching temp in under twenty minutes.

Most difficult part of the day? Pouring the wort from the kettle (actually, a S/S stock pot) through a funnel into the glass carboy. Next time, I’ll use a siphon! Should have aerated it well, though! And it’s a good thing, because the oxygen tank I have connected to an aerating “stone” evidently had the valve knocked open somehow and the canister was empty.

Ready for fermentation to start.

Ready for fermentation to start.

So, pitched the yeast and put on the airlock. There was action late last night and I heard that the Abbaye yeast is aggressive, so I switch the airlock to a blow-off tube set-up …

After fermenting 24 hours.

After fermenting 24 hours.

Blow-off tube and wrapped to keep light out.

Blow-off tube and wrapped to keep light out.

…and wrapped the carboy with a blanket to keep out light. The wort chugged all day today and is doing well, I think. As of tonight, about 32 hours after pitching the yeast, the bubbling has slowed slightly to once every few seconds.

Update: Steinpilz Gose: my brewbuddy came by and got the balance of the gose into a keg and is going to force carbonate it. I’m going to stick a couple of bottles in the fridge and we’ll compare when ready. Looking forward to that!

 

Standard
Uncategorized

Day 81 Racking the Blondes!

Racking from PFB to secondary glass carboy.

Racking from PFB to secondary glass carboy.

I started off the day with some cleaning and sanitizing chores and had my blondes racked to secondary before 10 a.m. I opened the box with my new 6 gallon glass carboy in it, took it out, washed it and sanitized it. Next, I fitted it with the nylon brew carrier and prepared an airlock.

For the strawberry blonde, I sanitized around the airlock and I prepared a hose to fit the spigot (primary fermentation was done in a bottling bucket). With the strawberry blonde on a table and the new carboy on the floor, I attached the hose to the spigot and dropped the other end down in the glass carboy. Next, I removed the airlock from the lid of the bottling bucket, so a vacuum would not be created. I opened the spigot and let the strawberry blonde flow into the carboy.

DSC04264

I do like seeing the liquid in the glass…last time was with my little pineapple experiment, “Pineapple Tinker”…which is still bottle conditioning. The convenience of the spigot on the bottling bucket is nice, but siphoning isn’t so bad.

Strawberry blonde, racked to secondary for clarification.

Strawberry blonde, racked to secondary for clarification.

The strawberry blonde has an interesting pinkish color to it; however, it is very murky at this point. I am very interested in what the beer will look like when it (hopefully) clears. I did manage a sample to double check the SG and it is dead on 1.010 according to the hydrometer, so that should be an FG of 1.011 with adjustment for temperature, assuming no further fermentation in secondary.  Never one to pass the opportunity to taste a hydrometer sample, I indulged to further educate my beginner’s palate! The flavor is…interesting, at this point. I would not expect a burst of fresh strawberry flavor. It definitely tastes of fermented fruit…sort of  a musty, winey flavor. From what I have read from other’s experiences, I’m hopeful that this flavor will clean up and back down a little with clarification and bottle conditioning. I do get some hop bitterness, but not overpowering…it’s there right at the front and then again in the finish. I think I’m getting kind of a strawberry jam-like aroma…nice.

The trub in the strawberry blonde PFB looked nasty…but then, they always do. This batch with the strawberries, though, was weird…it was like a strawberry vampire had sucked the color out of them!

Mmm...fermented strawberries!

Mmm…fermented strawberries!

DSC04268

After some cleaning chores to finish up the strawberry blonde process for today, I turned my attention to the “Plain Jane” blonde. For this one, I prepared and sanitized another 2 gallon primary fermentation bucket (PFB) and airlock. I also sanitized a hose and my siphon, since there is no spigot on the PFB’s. When I opened the bucket, the plain blonde was, not unexpectedly, more clear than the strawberry blonde.

Plain Jane Blonde in PFB

Plain Jane Blonde in PFB

I siphoned into the new PFB and noted that the color looked good. Being an extract brew, it is a dirty blonde…but who doesn’t like their blonde to be dirty? (Ahem) Moving along. I am missing my little racking tip that helps keep the end of the siphon tube off of the bottom of the bucket, so I had to be careful not to pick up any trub off the bottom. Thankfully, the trub (lees?) was pretty thick and settled. Would it be the correct use of the terminology to say that the trub had excellent “flocculation”? Anyway, siphoning was a snap and i was able to drag my finger through about 1/3 to 1/2 in sludge on the bottom without the path collapsing on itself for several seconds.

Plain Jane trub

Plain Jane trub

I did not want to waste any of this beer on hydrometer sampling, since it’s only about a gallon and a half, but it looked and smelled good. Sealed the lid and installed the airlock and finished my clean-up duties.

I’m betting that the strawberry blonde will take longer to clear than Plain Jane, but I will probably wait to bottle them both at the same time, for convenience. Stay tuned! Next brew will be a Chocolate Milk Stout with Costa Rican cocoa nibs and husks and lactose.

7:45 p.m.   Drinking a Citra Citrus American Wheat. This has got to be my greatest addition to the world of brewing to date! Everything is just right…aroma, color, bitterness, citrus …everything. This one MUST be done again. Soon.

Citra Citrus American Wheat...oh YES!!!

Citra Citrus American Wheat…oh YES!!!

Standard