Uncategorized

Day 168 Brew Day! Partial Mash with Cascade Hops Experiment

Ingredients for an experimental partial mash brew, with DME, grain steep and whole frozen hops and dried hops.

Ingredients for an experimental partial mash brew, with DME, grain steep and whole frozen hops and dried hops.

I have a friend whose son started planting Cascade hops in her garden four years ago. This year, he got a job at a brewery, out of town and wasn’t going to be around to harvest the hops. I was invited over to pick some. Fresh hops! What to do, what to do? I wasn’t ready to use them. I had never used fresh hops before and had no clue how to handle them. Thinking that the best thing was to have them as fresh as possible, I vacuum sealed them in canning jars and put them in the freezer.

Jar of whole hops that was vacuum sealed and frozen.

Jar of whole hops that was vacuum sealed and frozen.

I subsequently heard from a number of people that freezing fresh hops was not a good decision. They would likely become soft and slimey. Flavor was a  big question. One recommendation was to keep them frozen right up until putting them into the boil. So, that’s what I did…right into a little nylon bag and tossed right into the boil.

Some time later, my friend said I should come pick some more. When I arrived this time, instead of big, green cones, most of the hops were drying and turning brown. In addition, it was misty that morning and the “dry” hops were damp. I brought them home and put them in a large cardboard box and put them in the attic to finish drying. After several days, they were nice and dry, but I was concerned about the browning. They had plenty of appropriate aroma, though.

Since I have recently finished up some projects and had some Dry Malt Extract (DME) and a couple kinds of yeast on hand, I decided to try a smaller batch of beer and use some of each of the styles of Cascade hops, vacuum sealed frozen and vacuum sealed dried. I worked on a partial mash recipe and created an American Amber Ale that I’m calling Eastern Cascade Waterfall Ale. The yeast is a White Labs East Coast Ale yeast.

Boiling with the bags of hops...this is just after the 15 minute addition.

Boiling with the bags of hops…this is just after the 15 minute addition.

Eastern Cascade Waterfall Ale (American Amber, Single Hop, Partial Mash)

Batch size 3 gallons, 30 minute steep, 30 minute boil

Fermentables:

3 lb DME-Pilsen, boil 30 minutes

8 0z DME-Light, boil 30 minutes

1 lb American-Caramel/Crystal 60L, Grain sock steep 30 minutes @150F in 3.5 gallons strike water

Hops:

0.5 oz Cascade Fresh/Wet (Note: I used frozen, vacuum sealed in a jar.) Boil 30 minutes (in nylon bag)

1 oz Cascade Dried, Whole/Leaf,  Boil 15 minutes (in nylon bag)

1 oz Cascade Dried, Whole/Leaf, Dry hop (in nylon bag) in secondary, 5 days

Other:

Irish Moss (fining) Boil 15 minutes

Yeast: White Labs East Coast Ale Yeast, 1 vial, Optimum temp. 68-73F, 72.5% attenuation    (Note: I used harvested yeast and prepared a starter.)

Original Gravity: 1.053,      Final Gravity: 1.015,       ABV 5.04%     IBU (tinseth) 36.99     SRM (morey) 12.69

After the boil, I chilled to 68F in an ice water bath and tranferred to a bottling bucket for primary fermentation. I had a little under 3 gallons of wort, so I added enough Culligan bottled water to top it off to 3.25 gallons. The plan is to have 3 gallons to bottle after racking to secondary. I aerated with an oxygen stone for 2 minutes (or you could agitate/rock for 5 minutes).  Yeast pitched and fermentation bucket sealed and an airlock was installed at 1:05 pm.  As of 8:30 pm, signs of activity were evident in the airlock, though not aggressive. Unfortunately, I have no idea of the pitch rate. That’s one area (of several) that I have had no experience with figuring out.

Initial impression was positive…no weird or off flavors or aromas were noticeable. Color is a nice brown; perhaps a little darker than I anticipated, but all the indicators match the American Amber style, according to my recipe calculator. I did hit my Original Gravity (OG) number pretty closely. The recipe calls for 1.053 and I measured mine at 1.055 on my refractometer. Good brew day!

One update: the Scottish Samhain Pumpkin Ale has been in the bottles for 11 days now. I opened one of my two test bottles, at room temperature, and poured a small sample. The sample looked clear and, frankly, the aroma and flavor are amazing.

Finshed the chilled bottle later.

Finshed the chilled bottle later.

Scottish Samhain Pumpkin Ale sample.

Scottish Samhain Pumpkin Ale sample.

I recapped the bottle and stuck it in the refrigerator for later. I did open and drink the rest of the bottle tonight and my assessment stands. It is low on the carbonation, though not flat.  I hope that the carb will continue to improve over the next few weeks.

Update on the Eastern Cascade Waterfall: By 8 pm, there was sign of action in the airlock, but it was slow. By the morning after brew day, the airlock is happily chugging away, so my yeast starter appears to be a success!

Update 10/30/14: Eastern Cascade Waterfall Amber airlock action is slowing to a crawl. Probably going into secondary Sunday. Might just get it bottled by middle or end of next week. Lots of choices for Thanksgiving this year!

 

Standard
Uncategorized

Day 72 Moving American Wheat to Secondary

Nine days after brewing and my citrus infused American Wheat is ready to be transferred to secondary with some additional citrus.

Opening after 9 days in primary

Opening after 9 days in primary

In addition to 1/2 oz of dried sweet orange peel at 2 mins. left in the boil, I’m going to add another 1/2 oz in secondary along with the zest from a large lemon that has been soaking in the refrigerator, in about 1/3 c. white Bacardi rum, for the last 9 days. The rum will also go in.

Racking onto the dries peel, lemon zest and rum.

Racking onto the dried peel, lemon zest and rum.

Dried sweet orange peel and zest from one lemon soaked in 1/3 c. bacardi white run.

Dried sweet orange peel and zest from one lemon soaked in 1/3 c. bacardi white run.

I checked the gravity and the FG is 1.010 at 65 F, so the ABV should be about 4.46%. The sample flavor is nice…I’m looking forward to this one!

Nice color!

Nice color!

Final Gravity is 1.010 and 4.46% ABV.

Final Gravity is 1.010 and 4.46% ABV.

The Cascade hops give a nice bite, but not overpowering. The Citra hops and orange are reinforcing each other in the aroma and flavor. A couple of weeks in secondary and another couple in the bottle and I’m hoping it’s all going to come together nicely for an awesome brew!

Nice color. A little bitter. A good amount of citrus in the aroma and flavor...and more on the way!

Nice color. A little bitter. A good amount of citrus in the aroma and flavor…and more on the way!

Racking...currently, just under 5 gallons.

Racking…currently, just under 5 gallons.

Standard