Uncategorized

Brief Update: Fluffernutter Sammie Stout and Railer’s Pale Ale

Railer's Pale Ale, floating whole Cascade hops.

Railer’s Pale Ale, floating whole Cascade hops.

Tried a bottle of the Fluffernutter Sammie Stout a couple of days ago. There was no head…like pouring a soda with no ice. It bubbled when pouring and immediately dissipated. The carbonation is better than last try, but could still be better. I’m hoping this isn’t the best it’s going to get, or I’m disappointed. Flavor is not bad, but would certainly be more enjoyable with head and a little more carb. Maybe I just need to try another established recipe, without doing anything “interesting” to it. I might just do better with an ESB.

The Railer’s Pale Ale is coming along nicely. The Wyeast II 1272 yeast has performed very well…nice krausen, but no need for a blow-off tube. At this point, I think fermentation is done; but I’m giving it a little more time. I may take a hydrometer sample soon to start the verification process. I’m hoping to be able to keg this beer, with equipment belonging to a friend, for the Railhawk’s Soktoberfest event September 10th. The whole Cascade hops are floating …at least some of them. I’m hoping they will drop, but either way, I’m planning to rack to another carboy, using a strainer bag on the siphon. I’m optimistic with this beer…as long as it isn’t too sweet…but it will be consumed.

I just wish I could pull off a good stout with a nice head.

Standard
Uncategorized

Racking Fluffernutter Sammie Stout to Secondary

Racking the Fluffernutter Sammie Stout.

Racking the Fluffernutter Sammie Stout.

It’s Memorial Day…respect to all who served. I racked my Fluffernutter Sammie Stout to secondary fermentation today. I began by cleaning and sanitizing a carboy and adding my Everclear-soaked vanilla beans to it. Then, I brought a gallon of water to boil and whisked in 2 packages of peanut butter powder, 6.5 oz each, JIF brand. I boiled the peanut water for 10 minutes and then cooled it in a water and ice bath. Once down to about 73 F, I poured it through a sanitized funnel, into the carboy. Next, using a siphon and tube, I racked the beer onto the peanut water and vanilla beans.

I left most of the original trub behind, and wound up with 5-1/2 gallons in the secondary carboy.

5-1/2 gallons into secondary fermentation.

5-1/2 gallons into secondary fermentation.

I took a hydrometer sample after racking and came up with a current SG of  1.031. (Adjusted for sample temperature of about 70 F.) I’m still guessing it may go down to 1.028, but we will see where it is after 10 more days and monitor it from there, to determine when it is ready to bottle.

Hydrometer sample, trub from primary fermentation.

Hydrometer sample,  trub left in primary fermentation.

The color looks nice. The flavor is obviously “in your face” peanut right now. Hopefully, the vanilla will bloom and the peanut will tone down, as anticipated. I may have to up the vanilla, though…possible some extract at bottling. I’ll have to make a judgement call later. So, back into the fermentation chamber…which has been working out very nicely!

Standard
Uncategorized

Brew Day: Fluffernutter Sammie Stout

Set up to brew.

Set up to brew.

 

Finally! For the first time in 7 months, I brewed some beer! I created this recipe months ago and tweaked it some, but just didn’t want to brew again until I was able to control my fermentation temperatures. I have had ongoing issues with over-carbonation and I have had some off-flavors, particularly with darker beers…some are metallic or just very one dimensional. I have addressed everything I can, except fermentation temperature and yeast selection. For this sweet stout, I decided to go with Wyeast 1968. Optimal temperature range is around 64 to 70F. So, instead of my normal household room temperature of around 72F, with wort temps reaching 75 to 78, I now have a small chest freezer with controls to regulate the temperature. I have it set at 63-64F. I’m hoping this will at least help the flavor of the beer. If it helps with the carbonation issue, too, then that would be awesome!

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

http://www.brewersfriend.com/homebrew/recipe/view/295261/fluffernutter-sammie-stout

I did have to make some minor changes based on homebrew shop ingredients availability…nothing major. Brew day went very smoothly, except for mash temperature climbing to 160F, instead of 155F. With about 25 minutes left, I removed the insulation/lid and started stirring to lower the temperature. With 10 minutes left, it was down to 156-157.

Brew in a bag...the "mash in".

Brew in a bag…the “mash in”.

My understanding is that the effect would be less fermentable sugars and possibly a little sweeter finish. I also added lactose with 10 minutes left in the boil. The end of the boil was fine, except the OG was high. I have a feeling that the lactose is not figured into the refractometer/hydrometer readings, because otherwise, it looks fine.

The boil is done.

The boil is done.

As a result of being able to drop the temperature to 71-72F, pitch the yeast and drop the carboy in a 64F fermentation chamber, the “take-off” for the yeast was barely noticeable 20 hours later. There was just a ring of bubbles around the top inside of the carboy. Now, at about 26 hours, there is audible bubbling and more visible signs of fermentation.

Controls to convert the freezer to a fermentation chamber.

Controls to convert the freezer to a fermentation chamber.

My concerns, at this point, are whether or not I added enough peanut powder to be noticeable in the final product, and if the vanilla planned for secondary will give the marshmallow flavor. A couple little sips of the wort towards the end of the boil did not really convince me on the peanut powder…and what IS marshmallow flavor? Marshmallows are basically corn syrup, sugar, gelatin, and vanilla. I’ll investigate some more and see if peanut powder can be effectively added during primary or secondary fermentation, as well as exploring the marshmallow flavor a bit more. If I make changes, I will definitely update the recipe. For tonight, it’s reading, while the fermentation builds.

 

 

Standard
Uncategorized

Racking There Gose Sea Breeze and Blueberry-Muscadine Wine

Racking the gose base onto the grapefruit zest.

Racking the gose base onto the grapefruit zest.

Fermentation seems to have slowed way down on the “There Gose Sea Breeze” beer and I’m trying to get it done for Thanksgiving, so I racked it today. Problem: my Blueberry-Muscadine Wine is in my other carboy. I need a third to make this process work. So, I went to a local home brew shop to check out my options. I decided to go with a 5 gallon Better Boy brand plastic carboy with a port on it for a tap. That will allow me to use it like a bottling bucket, rather than having to use a siphon. Maybe this will reduce the chance for infection by one more function…maybe. Seems like a good system, but the tap is a bit tricky to install and it ain’t cheap. The carboy itself was about $28. Then, the tap comes as two separate pieces that add up to about another $30. Then, I needed the special size of stopper for the top, some 1/2″ tubing and a 1/2″ diameter bottling cane. Altogether, with tax, it was about $85.

After I got everything organized, cleaned, put together, and sanitized, things went pretty smoothly. I went with the 5 gallon Better Boy because I plan to generally use it for secondary fermentations and, at that point, usually I’m down in that range. When I racked the wine, I got a nice, full 5 gallons.

Blueberry-Muscadine Wine racked for some bulk conditioning.

Blueberry-Muscadine Wine racked for some bulk conditioning.

I then squeaked out about another quart, into a half gallon glass jug. I may go ahead and bottle that in a 22 oz bomber, when I get a chance. There’s too much head space there and I don’t want it to oxidize.

Once the wine was transferred and the glass carboy it was in was cleaned and sanitized, I prepared to rack the beer into it. I set-up the siphon and hose. Next, I added the grapefruit zest and vodka from the freezer to the carboy and began racking the beer onto it.

Grapefruit zest and vodka from the freezer.

Grapefruit zest and vodka from the freezer.

Once that was all squared away, I started making the hibiscus tea.

Unsweetened, dried hibiscus flowers.

Unsweetened, dried hibiscus flowers.

I used a quart of hot Culligan (bottled) water and 5 oz of dried hibiscus flowers to a 2 quart stainless steel sauce pan.

Steeping to a beautiful concentrate.

Steeping to a beautiful concentrate.

Since I didn’t have one a bit bigger, I went ahead and brought another quart of the water to a boil in a big stainless stock pot. After the hibiscus flowers were brought to a boil, I covered them and turned off the heat. The other water boiled for a few minutes and, after the flowers steeped for 10 minutes, I strained the tea concentrate into the boiling water. I cleaned the smaller pot and then strained the entire amount of liquid back into it and it just did manage to fill it completely. Note here…steeped hibiscus flowers don’t do well in a garbage disposal unit. I should have composted them. Live and learn. After a little disposer cleaning, I got back to my hibiscus concentrate and funneled it into a sanitized glass container, covered it with sanitized plastic wrap and stuck it in the refrigerator to cool overnight.

Bringing the temp down on the hibiscus tea concentrate.

Bringing the temp down on the hibiscus tea concentrate.

 

 

 

 

The final thing I wanted to accomplish tonight was to attempt to harvest some yeast. If I like the result in this gose, I wouldn’t mind making another gose or a maybe try making a kolsch, before the really cold weather starts coming around. So, for tonight, I poured off some of the trub that was left behind in the carboy that I racked out of and funneled it into a sanitized 1/2 gallon glass jug.

Attempting to harvest some yeast for future use.

Attempting to harvest some yeast for future use.

I topped that off with Culligan bottled water and added a sanitized cap. I’ll let that sit out overnight and separate. I’ll update here tomorrow when I add the hibiscus tea concentrate and further separate the yeast.

11/2/15 update: Added the hibiscus tea to the gose and it looks like a giant jar of cranberry sauce!

IMG_20151102_070230010

I also decanted the liquid off of the yeast I’m trying to harvest. My understanding is that the yeast is the thin whitish layer on the top of the sediment. I transferred that to a pint jar and added water, We’ll see how that settles.

Transferred yeast to smaller jar and added water.

Transferred yeast to smaller jar and added water.

Yeast settled for harvest.

Yeast settled for harvest.

Standard
Uncategorized

There Gose Sea Breeze

Brew Day!!! Adding the grain to the heated water. or "mashing in".

Brew Day!!! Adding the grain to the heated water. or “mashing in”.

So, two days ago (Thursday, October 24, 2015), my wife asked me, “If you brew a batch of beer tomorrow, will it be ready in time for Thanksgiving?” I figured it would, as long as it wasn’t something that needed a long time to ferment or bottle condition. Maybe an IPA? Well, she was going to be taking kids to the NC State Fair…all day…so I was authorized to brew. That night, I did some research for holiday beers and everything seemed to be porters and stouts. IPA’s were recommended by some sources, but so many hops and dry hopping…just didn’t feel it. Then I thought, “How about a refreshing gose style? That’ll cut through the heavy foods.” I brewed a gose before and, while mushroom was not the most successful flavor choice, it was technically very good.

Okay, so the next decision: how do I want to flavor it? I immediately thought about cranberries…tart, refreshing, a little citrusy. So, I did a little research on cranberries. It turns out that cranberries present a problem for brewing: they float. And raw, floating berries don’t ferment well or add much flavor. Even chopped, they don’t do much better. If you cook them, the flavor changes and the pectin comes out. That presents more problems. How about cranberry juice? I was afraid I wouldn’t be able to find pure juice, without additives. Not for a reasonable price, anyway. In my research, someone recommended dried hibiscus flowers as an alternative…very similar to the flavor of cranberries and great color. I used them in a previous recipe very successfully and, in fact, still have a supply! Hibiscus it is.

Dried Hibiscus F;owers

Dried Hibiscus F;owers

I pulled out my previous gose recipe and began working on it. Substitute hibiscus for the mushrooms, up the salt from .75 oz to 1.25 oz, and add .25 oz ground coriander. The coriander is traditional, but needs to be restrained. I bought a fresh bottle and smelled it. Surprisingly, it reminded me of hops.

Hops. coriander, sea salt, and Irish moss additions.

Hops. coriander, sea salt, and Irish moss additions.

I also decided to go with a traditional hop choice: Saaz. As I was putting together the recipe, I happened to run across a cranberry cocktail called “Sea Breeze”. It is made with cranberry juice, vodka, grapefruit juice, salt and a lime garnish.

Sea Breeze Cocktail (Photo via Wikipedia)

Sea Breeze Cocktail (Photo via Wikipedia)

Well, since we are going to be drinking this at the beach, I figure…add some grapefruit zest, sanitized in vodka, and There Gose Sea Breeze!

Grapefruit zest from 3 grapefruits.

Grapefruit zest from 3 grapefruits.

Lime garnish optional. I got all the information plugged into the recipe and it looks good! You can get the recipe here: http://www.brewersfriend.com/homebrew/recipe/view/289756/there-gose-sea-breeze

Before I could brew, I had a lot of cleaning, preparation, sanitizing, to do. Plus a run to the grocery store and local home brew shop. Then I had to organize and set up for the brew. I think I finally started brewing about 1:15 pm. Steps went fine. I overheated the strike water, but not too badly.  The special grain, the acidulated malt, is added after the first 60 minutes and takes an extra 45 minutes to mash…it adds a lightly sour component to the beer. After the mash, I added an additional gallon of water for the boil. Everything else went smoothly and I wound up with a carboy full of wort!

That's a full carboy!

That’s a full carboy!

Checkiing the Specific Gravity(SG) with a refractometer and a hydrometer, I determined the Original Gravity(OG) to be 1.063. The Final Gravity(FG) is anticipated to be around 1.014, which would put the ABV at 6.3%. I pitched the yeast, finally, at about 6:30 pm.

I put a blow tube on this morning, after having to do a little floor cleaning. The good news is that the yeast is alive and active!

Blow off tube...should have put on at the start.

Blow off tube…should have put on at the start.

Standard
Uncategorized

Racking to Tertiary: Mowing Mt. Ranier

Racking to tertiary for clearing.

Racking to tertiary for clearing.

Looks like the Mowing Mt. Ranier Ale, Cherry-Citra “lawnmower beer” is done with secondary fermentation and dry hopping. I let it go a couple of extra days, just in case, because the cherries in secondary DID restart fermentation.

Secondary-fermented red cherries...giving up flavor and color.

Secondary-fermented red cherries…giving up flavor and color.

Once the small amount of krausen worked itself out, much of it precipitated to the bottom, just leaving the cherries floating. (Note: my little 1/2 gallon blackberry recipe looks good, too and I racked it as well. Not as much color imparted by the blackberries, but the flavor is interesting…good.)

After settling under refrigeration, the blackberry sample.

After settling under refrigeration, the blackberry sample.

Racked my little blackberry batch, too.

Racked my little blackberry batch, too.

The red cherries did impart some color that I would not have gotten if I had used all Mt. Ranier cherries; however, it IS a nice color. I removed a sample for tasting and to get an SG reading. The color, as I said, is nice. The flavor has pronounced cherry and citra, without being sweet or heavy.

Transferred back to clean carboy to clear for a couple of days.

Transferred back to clean carboy to clear for a couple of days.

Sample of Mowing Mt. Ranier Cherry-Citra Ale

Sample of Mowing Mt. Ranier Cherry-Citra Ale

The SG got down to 1.007, so the alcohol should be 4.73% ABV. That’s actually a little lower than the recipe estimated, but I’m actually very happy with that.

I cleaned and sanitized a bottling bucket and racked into it. I dumped the cherries, hops bag, and the small amount of trub that made it through the last racking. I washed, rinsed, and sanitized the carboy again and transferred the beer back into it. Looks good…pretty clear. I’ll give it a couple of days to settle and then it should be good to bottle.

Standard
Uncategorized

Racking to Secondary: Mowing Mt. Ranier

 

Ready to rack to secondary

Ready to rack to secondary

A few days ago, I did a specific gravity test on the Mowing Mt. Ranier Ale with Cherries. It was down to 1.009 (the anticipated was 1.008) and hadn’t shown signs of activity in several days. To be safe, I waited a few more days before racking. I had some time this morning, so I went ahead and got it done. I removed the stems and pits from some regular red cherries and weighed out a pound.

One pound of pitted cherries, stems removed.

One pound of pitted cherries, stems removed.

I was not able to find Ranier cherries locally anymore and my brother in-law canceled an order for dried ones when I warned him not to get ones processed with sunflower oil. Unfortunately, that’s what he had ordered. So, I have decided to finish the beer with the regular, fresh, red cherries. I sanitized them in StarSan, since I didn’t have time to soak them in vodka and freeze them. I also have a small experimental batch that is just about a 1/2 gallon after racking. I have sanitized a pint of frozen blackberries and added them to that little batch.

Frozen blackberries for the little experimental batch.

Frozen blackberries for the little experimental batch.

After racking the main batch, I cleaned the carboy, sanitized it, and transferred the beer back into it, onto the cherries.

Racking

Racking

Sanitizing the carboy.

Sanitizing the carboy.

Cherries in secondary.

Cherries in secondary.

1/2 oz Citra hops pellets for dry hop addition.

1/2 oz Citra hops pellets for dry hop addition.

I have what appears to be right at 5 gallons. To this, I added a dry hop addition of 1/2 oz Citra hops pellets that I contained in a little sanitized fine mesh bag. Dropped that in and put the airlock back in place. There is a possibility that the yeast, suspended in the beer, could start fermentation back up with the sugar in the cherries. Ideally, the batch will be done in five days. If it takes longer, that’s okay. I’ll let it be ready when it’s ready. So far, everything looks and smells good. There isn’t a lot of cherry flavor, but I’m not looking for cherry soda. The cherries added to secondary should give me what I’m going for.

Standard