Uncategorized

Racking Muscadine Wine 2016

Time to make some wine.

Time to make some wine.

 

Well, I racked the muscadine wine. Unfortunately, one of my plastic carboys in missing in action, so I racked it into my glass one. I added one crushed Campden tablet to the new carboy and away we went…from the bottling bucket in which I did primary fermentation to the glass carboy.

Racking to the carboy.

Racking to the carboy.

My carboy is over 5-1/2 gallons and racking left me a little under 5 gallons. In order to prevent oxidation, I topped off with about 1.25 gallons of Culligan bottled water. I know it will drop the alcohol a bit and dilute the wine, but I actually want something lighter than the wine from last couple of years. I might even backsweeten a little after fermentation is complete and the wine is stabilized.

Nice color. Topped up with Culligan bottled water.

Nice color. Topped up with Culligan bottled water.

The color is nice…a kind of purple version of a rose’. The flavor still has a little muscadine flavor. I’m hoping when conditioning is done and I backsweeten and bottle, I will have an easy-drinking wine that will be a “half-sweet” wine that will be ready to drink in a year.

Update 10/18/16: Okay, I racked the wine off of the lees and it’s really nice and clear. I wound up with a little under a half of a gallon excess…might use it to experiment with backsweetening. Also took a hydrometer sample…looks like 1.001, after adjusting for temperature. So, it’s pretty dry, at the moment. Once I’m sure it’s stable and won’t start fermenting again, I’ll adjust the sweetness. I did add another crushed Campden tablet to hopefully achieve stabilization…it may take an overnight outside on a cold night…but there’s plenty of time. I’d just rather not add Campden after this point. A quick sip reveals that it doesn’t taste bone dry, which is good! And it’s a light body. This one may actually be ready to drink next Summer.

Standard
Uncategorized

Muscadine Wine 2016

Time to make some wine.

Time to make some wine.

From the bucket of muscadine grapes that I picked from my niece’s grape arbor recently, I am making a batch of wine. I am starting with 11lbs, 5oz of grapes. You could use more or less, from what I have read; recipes vary greatly. I wouldn’t use less than 10lbs.  I have chosen a yeast that I hope will leave me with a “half sweet” wine. Not bone dry, but not too sweet. So, pulling together what I have learned from two previous batches of wine and the reseach I did for those, this is the recipe I’ve put together…..

Muscadine Wine

11 pounds, 5 oz Muscadine Grapes

3-4 gallons water (top up later, as needed)

sugar (up to 9lbs, dissolved in water for hydrometer or refractometer reading 1.090)

Cote des Blancs yeast

5 Campden tablets, crushed (1 per gallon)

5 teaspoons yeast nutrient

Acid blend to increase acid or

calcium carbonate (or potassium bicarbonate) to reduce acid (if needed)

(Acidity should be more than 0.55% and no more than 0.70%, there is a test kit available at wine/brew shops)

1-1/4 teaspoons Pectic enzyme

Make sure all utensils and containers are sanitized. I use a product called Starsan. Crush the grapes and add to a mesh straining bag (available at brew shops).

Crushed grapes in strainer bag, with juice.

Crushed grapes in strainer bag, with juice.

Pour the juice into a fermentation container (bottling bucket works well) and add the bag of grape skins/pulp.

Bottling bucket...good for primary fermentation of 5 gallon wine batch.

Bottling bucket…good for primary fermentation of 5 gallon wine batch.

Test the specific gravity of the juice. Use a calculation tool to figure out how much sugar to add for a 5 gallon batch. Dissolve the sugar in some hot water. Add to the juice/grapes and top off to 5 gallons. Verify the SG is in the correct range, around 1.090…it may require preparation of additional sugar/water solution. Add the crushed Campden tablets and yeast nutrient. Stir well and allow to sit for 10-12 hours, sealed and fitted with an airlock.

Test the acid and SG again. Adjust acid as needed.  Add pectic enzyme.  Rehydrate yeast as package directs. Pitch yeast and reseal.

Open the container and push the bag of grape must down and stir well with the juice…do this twice a day for the next 5 to 7 days. Check  for the SG to drop to around 1.030 and then remove the strainer bag. Squeeze to get any additional juice and then discard (or compost!). Rack to a carboy, leaving the sediment (lees) behind and continue fermentation until complete. Rack again a couple more times at 2 months intervals, until clear. Add 1 crushed Campden tablet each time the wine is racked. Stabilize and wait for any suspended yeast to fall. Bottle and age at least 1 year and up to 3 years.

Process this time: I crushed the grapes in a sanitized bucket, using a sanitized aluminum baseball bat.

Crushed muscadine grapes.

Crushed muscadine grapes.

I used a refractometer to check the juice SG and it came in at 1.058. I tried figuring out the sugar amount to add using Brewer’s Friend online tool. I found out that this process is called “chapitalization”. Unfortunately, I did it wrong. I mixed the sugar with the water and added it to the grape must. Once I added the water up to 5 gallons, the the SG was only 1.045.

img_20160911_190510847

Grape must in strainer bag, with water, sugar, Campden tablets, and yeast nutrient.

So, I went back to the calculator tool and entered the new figures and recalculated the additional sugar needed. Altogether, the amount of sugar added was exactly 8lbs and the new SG reading is 1.091. Being off .001 is acceptable. I also added the 5 crushed Campden tablets and 5 teaspoons of yeast nutrient. Now it sits until tomorrow morning.

9/12/16: Okay., I added the pectic enzyme. Now we get to the part that I’m less confident about, but I’m going to do the best I can: measuring the acid. I have a kit that contains two chemicals. You measure and add one to a test tube (if it came with one, I’ve lost it, so I improvised), add some water. Then you measure some of the other and start adding it drop by drop to the test tube. When the color changes, without being able to swirl it clear again, you stop. You figure out how much you used and plug that into a formula and get a number that represents the acid content. Then you compare that to a range you should be in. That will determine if you need to raise the acid content or reduce it. From what I have read, muscadines are high acid, so I anticipated that I may have to reduce them…and I had not bought the right stuff to do that. Turns out, the acid is quite low. The 2oz of Acid Blend that I bought will not be enough. The figure I came up with was 1.2 ppt sulfuric (or 0.1875 % tartaric). Pretty much Greek to me, but I found the way to figure out the amount of acid blend needed was easier using the ppt sulfuric method. At 1.2 , I needed to add 1 oz to 5 gallons for each 1.1 increase. I had 2oz on hand, so that got me up to 3.4 ppt sulfuric. The range I need to be in for this wine is 3.9 to 4.2…a half ounce more would put be at the minimum, and an ounce would put me at 4.5, a little over. I need just under 3/4oz (4.225). 0.70oz will be 4.17. So, I need to find some acid blend today…my closest store isn’t open on Mondays, so I may have to drive a bit. I know this may sound like a bunch of confusing junk, but I’m trying to get a decent end product, so I’m going to deal with it. My biggest fear is that the wine will not have enough flavor…maybe I should have used more grapes? Crossing fingers. I will be pitching the yeast late tonight.

9/12/16: 9:00 p.m. Double checking test numbers after adjustments. ppT Sulfuric looks like 4.0 and % Tartaric looks like 0.625…these numbers are right where I would want them. The pH test is a little harder to judge. I was hoping it would be more than 3.0. The color on the test strip is defininately darker than 2.8 and lighter than 3.2, but there is no color reference in between. I guessed 3.0 before and maybe it’s a little darker…just hard to judge. I’m going to go by the acid test and assume I’m good. I did take another refractometer reading and got 1.086…ugh! So, I ran it again and got 1.091…whew! Starting the rehydration of the yeast and that will be pitched shortly.

9/12/16: 11.45 p.m. Yeast pitched. Cote des Blancs from Red Star. Decription: “Cote des Blancs is also known as Epernay II. It is recommended for Chardonnay, Riesling, mead and cider, as well as fruit wines, particularly apple. it imparts a fruity aroma in both red and white wines. A slow fermenter that works best between 50 and 80 degrees. This strain will not ferment to a dryness at the low end of the range, leaving residual sugar resulting in a sweeter wine.”

9/16/16: Removed grape must added a little water and removed hydrometer sample. 73.4 F and 1.040 on hydrometer = SG 1.041 . I’m going out of town and won’t be available to stir for a few days, so I went ahead and pulled the bag and drained.

Standard
Uncategorized

Fluffernutter Sammie Stout Update

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Update 5/24/2016: An unexpected little run of cooler temperatures had me worried that the beer was not fermenting. I know it did for a couple of days, albeit a bit slowly…never really started “chugging”, but going. Then the cool weather, and my little fermentation chamber is outside. It is only able to cool, not warm, so this could be a problem. Since the overnight low last night was going into the mid to lower 50’s, I decided to bring the carboy inside.

I took a sample and did a temperature and hydrometer reading. The temp was 62.5, so it wasn’t terrible…a little under optimum range, but should not be low enough to have caused any harm. The hydrometer has the specific gravity at 1.030, so it definitely was fermenting. That’s good! Adjusting for the lactose, I think it will likely only go to 1.028 or so.

Hydrometer sample for evaluation...specific gravity, temperature and flavor.

Hydrometer sample for evaluation…specific gravity, temperature and flavor.

The flavor of the sample has my hopes up! The color may be a tad light, but it’s a little darker than the sample shows, because of the camera flash and the particles had not settled out yet. I could definitely taste the peanut flavor, especially in the finish. Nice malty sweetness. After the sample chilled overnight, the peanut flavor is more muted. With that and the consensus from others that the peanut flavor will start fading after a couple of months in the bottles, I do plan to add more peanut powder to secondary via boiling it with water and cooling it…probably a gallon and then racking onto it and the vanilla beans. I’m going to skip the marshmallow Fluff in secondary and rely on the vanilla for that flavor, so I’m not adding much more fermentable sugars. I may try adding some to the boil in a future batch, but not this time. I have a feeling that this beer’s flavor will improve as it loses some of its chill, after pouring.

The temperature on the carboy strip thermometer reads around 66-68F, so I’ll be putting it back in the fermentation chamber later today.

Standard
Uncategorized

Brew Day: Fluffernutter Sammie Stout

Set up to brew.

Set up to brew.

 

Finally! For the first time in 7 months, I brewed some beer! I created this recipe months ago and tweaked it some, but just didn’t want to brew again until I was able to control my fermentation temperatures. I have had ongoing issues with over-carbonation and I have had some off-flavors, particularly with darker beers…some are metallic or just very one dimensional. I have addressed everything I can, except fermentation temperature and yeast selection. For this sweet stout, I decided to go with Wyeast 1968. Optimal temperature range is around 64 to 70F. So, instead of my normal household room temperature of around 72F, with wort temps reaching 75 to 78, I now have a small chest freezer with controls to regulate the temperature. I have it set at 63-64F. I’m hoping this will at least help the flavor of the beer. If it helps with the carbonation issue, too, then that would be awesome!

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

http://www.brewersfriend.com/homebrew/recipe/view/295261/fluffernutter-sammie-stout

I did have to make some minor changes based on homebrew shop ingredients availability…nothing major. Brew day went very smoothly, except for mash temperature climbing to 160F, instead of 155F. With about 25 minutes left, I removed the insulation/lid and started stirring to lower the temperature. With 10 minutes left, it was down to 156-157.

Brew in a bag...the "mash in".

Brew in a bag…the “mash in”.

My understanding is that the effect would be less fermentable sugars and possibly a little sweeter finish. I also added lactose with 10 minutes left in the boil. The end of the boil was fine, except the OG was high. I have a feeling that the lactose is not figured into the refractometer/hydrometer readings, because otherwise, it looks fine.

The boil is done.

The boil is done.

As a result of being able to drop the temperature to 71-72F, pitch the yeast and drop the carboy in a 64F fermentation chamber, the “take-off” for the yeast was barely noticeable 20 hours later. There was just a ring of bubbles around the top inside of the carboy. Now, at about 26 hours, there is audible bubbling and more visible signs of fermentation.

Controls to convert the freezer to a fermentation chamber.

Controls to convert the freezer to a fermentation chamber.

My concerns, at this point, are whether or not I added enough peanut powder to be noticeable in the final product, and if the vanilla planned for secondary will give the marshmallow flavor. A couple little sips of the wort towards the end of the boil did not really convince me on the peanut powder…and what IS marshmallow flavor? Marshmallows are basically corn syrup, sugar, gelatin, and vanilla. I’ll investigate some more and see if peanut powder can be effectively added during primary or secondary fermentation, as well as exploring the marshmallow flavor a bit more. If I make changes, I will definitely update the recipe. For tonight, it’s reading, while the fermentation builds.

 

 

Standard
Uncategorized

Checking the Specific Gravity on There Gose a Sea Breeze

Hydrometer Sample

Hydrometer Sample

After I racked to secondary, added the grapefruit zest and hibiscus tea concentrate, there seemed to be some additional fermentation happening. It wasn’t much…in fact, I was afraid the little white bubbles were going to turn out to be an infection. However, they did eventually fade away.  The OG was supposed to be 1.062, and it came in at 1.063. The current SG reading is 1.014 with a temperature of 72.8F.

Hydrometer reading.

Hydrometer reading.

After temperature correction for the hydrometer, the actual SG is 1.015, which is .001 above expected FG. Considering that the OG was .001 high, fermentation could be done.

The thing is, I really want this beer to be carbed and ready to drink by Thanksgiving, which is about 2-1/2 weeks away and carbing will likely take at least 10 days. I’d rather give it a month, but it is what it is. So, just in case the fermentation isn’t COMPLETELY done, and, considering my history with over-carbonation…I think I will bottle in new bottles, underestimate the priming sugar, and cross my fingers.

Regarding the beer’s other characteristics, I am hopeful. The sample is a pretty cranberry color, the front end is appropriately a little salty (but not overly so), then there’s tart, followed by a little sour in the finish. The thing is, I don’t know how to describe the aroma or the flavor. I think the hibiscus is giving it a little cranberry character, but I’m not sure how the coriander and grapefruit zest are influencing the flavor. There’s obviously a blended flavor there. I just don’t have the palate and experience to put it into “proper” tasting terminology. But I like it. I really look forward to getting some feedback from some more experienced brewers.

Standard
Uncategorized

There Gose Sea Breeze

Brew Day!!! Adding the grain to the heated water. or "mashing in".

Brew Day!!! Adding the grain to the heated water. or “mashing in”.

So, two days ago (Thursday, October 24, 2015), my wife asked me, “If you brew a batch of beer tomorrow, will it be ready in time for Thanksgiving?” I figured it would, as long as it wasn’t something that needed a long time to ferment or bottle condition. Maybe an IPA? Well, she was going to be taking kids to the NC State Fair…all day…so I was authorized to brew. That night, I did some research for holiday beers and everything seemed to be porters and stouts. IPA’s were recommended by some sources, but so many hops and dry hopping…just didn’t feel it. Then I thought, “How about a refreshing gose style? That’ll cut through the heavy foods.” I brewed a gose before and, while mushroom was not the most successful flavor choice, it was technically very good.

Okay, so the next decision: how do I want to flavor it? I immediately thought about cranberries…tart, refreshing, a little citrusy. So, I did a little research on cranberries. It turns out that cranberries present a problem for brewing: they float. And raw, floating berries don’t ferment well or add much flavor. Even chopped, they don’t do much better. If you cook them, the flavor changes and the pectin comes out. That presents more problems. How about cranberry juice? I was afraid I wouldn’t be able to find pure juice, without additives. Not for a reasonable price, anyway. In my research, someone recommended dried hibiscus flowers as an alternative…very similar to the flavor of cranberries and great color. I used them in a previous recipe very successfully and, in fact, still have a supply! Hibiscus it is.

Dried Hibiscus F;owers

Dried Hibiscus F;owers

I pulled out my previous gose recipe and began working on it. Substitute hibiscus for the mushrooms, up the salt from .75 oz to 1.25 oz, and add .25 oz ground coriander. The coriander is traditional, but needs to be restrained. I bought a fresh bottle and smelled it. Surprisingly, it reminded me of hops.

Hops. coriander, sea salt, and Irish moss additions.

Hops. coriander, sea salt, and Irish moss additions.

I also decided to go with a traditional hop choice: Saaz. As I was putting together the recipe, I happened to run across a cranberry cocktail called “Sea Breeze”. It is made with cranberry juice, vodka, grapefruit juice, salt and a lime garnish.

Sea Breeze Cocktail (Photo via Wikipedia)

Sea Breeze Cocktail (Photo via Wikipedia)

Well, since we are going to be drinking this at the beach, I figure…add some grapefruit zest, sanitized in vodka, and There Gose Sea Breeze!

Grapefruit zest from 3 grapefruits.

Grapefruit zest from 3 grapefruits.

Lime garnish optional. I got all the information plugged into the recipe and it looks good! You can get the recipe here: http://www.brewersfriend.com/homebrew/recipe/view/289756/there-gose-sea-breeze

Before I could brew, I had a lot of cleaning, preparation, sanitizing, to do. Plus a run to the grocery store and local home brew shop. Then I had to organize and set up for the brew. I think I finally started brewing about 1:15 pm. Steps went fine. I overheated the strike water, but not too badly.  The special grain, the acidulated malt, is added after the first 60 minutes and takes an extra 45 minutes to mash…it adds a lightly sour component to the beer. After the mash, I added an additional gallon of water for the boil. Everything else went smoothly and I wound up with a carboy full of wort!

That's a full carboy!

That’s a full carboy!

Checkiing the Specific Gravity(SG) with a refractometer and a hydrometer, I determined the Original Gravity(OG) to be 1.063. The Final Gravity(FG) is anticipated to be around 1.014, which would put the ABV at 6.3%. I pitched the yeast, finally, at about 6:30 pm.

I put a blow tube on this morning, after having to do a little floor cleaning. The good news is that the yeast is alive and active!

Blow off tube...should have put on at the start.

Blow off tube…should have put on at the start.

Standard
Uncategorized

Update/Additional Racking Blueberry-Muscadine Wine

Blueberry-Muscadine Wine sample.

Blueberry-Muscadine Wine sample.

A very brief update on the Blueberry-Muscadine Wine. I racked the wine again (with a Campden Tablet to help insure no contamination), so that I could use the plastic carboy that it was in for a beer project. The wine is now in a slightly smaller, glass carboy. To decrease the head space a little, I added about a gallon of Culligan bottled water.

Racking the wine.

Racking the wine.

There’s plenty of alcohol, so that’s no problem. (ABV, after checking the SG with a hydrometer looks to be about 15.49%!) The flavor is actually pretty good already…not too “hot” or “green”. The color is beautiful and clarity is good. After a few sips, I added a little Sierra Mist soda to the glass…yeah, I know, but I did anyway, and it was really tasty! I will definitely bulk age this wine a little longer and then bottle condition for awhile; but I may just fill a bottle and take on our Thanksgiving trip to the beach and see what people think.

Standard