Uncategorized

Raleigh Brewing Company Free Wort Giveaway; Railer’s Pale Update

 

Raleigh Brewing Company wort.

Raleigh Brewing Company wort.

I picked up 5 gallons of free wort from Raleigh Brewing Company today…was supposed toget some awhile back, but they ran out. They were nice enough to make more specifically for the people that missed out, so I got some today! The recipe is not exactly known, but it is basically 2-row malt and a little Crystal 10L, from what I was told, with 3 additions of Willamette hops. I’m using Wyeast American Pale Ale 1272 yeast again and fermenting in the mid to upper 60’s F range. Pitched the yeast at about 3;45 pm. I’m going to keep this one simple. No adjuncts, no racking until bottling. And back to corn sugar for priming, to make sure I’m getting it dissolved well…could be an issue with table sugar priming. I think I’ll boil water to dissolve it in first and rack onto it, just to be sure the primer is evenly dispersed.

Update on Railer’s Pale Ale: kegged for the event. I put it in a friend’s keg, who will be donating to the event as well, and helping me with mine…since I know nothing about kegging. The event is Sept 24, for the Carolina Railhawks Soccer fans. “Soktoberfest”. There is a small (I hope) issue…there was a thin “skin”on top of the beer that had just formed in the last couple of days…signs of infection. It tasted okay though, and after discussing it, my friend said she would go ahead and keg it. We will keep our fingers crossed. One possible cause is that the hose I racked with was too short and allowed too much oxygen into the beer at racking, which would encourage an infection. So, I bought some longer tubing at the home brew shop today.

Update 10/8/16: Railer’s Pale Ale: A.L.E. decided that, despite the fact that this event has been done for 3 years, this year they won’t allow it. “Homebrew beer is for at home.” So, now I have about 4-1/2 gallons of beer with no plans, and it’s kegged at a friend’s house. No idea what to do with it. Probably bottle a little bit from the keg and screw the rest. I have too much taking up space as it is. And, in the fermentation chamber, the wort I got two months ago from Raleigh Brewing Co., seems to be continuing to ferment. WTF?! Possible infection, but it tastes okay and there’s no pellicle…just some bubbles. It’s a little bitter for a pale ale, but otherwise okay. I wasn’t planning on messing with it, but it might benefit from some dry hopping with something like Citra, to cut that bitterness and give it a little more aroma and flavor. At some point, I may have to cold crash it…worried about priming/bottling and creating bottle bombs…Hell, I may just dump  it and skip brewing for awhile. Maybe get some new hardware and reduce the threat of infections via tubes, siphons, buckets, carboys, etc., that I’ve had for a few years now. I was excited to get the fermentation chamber set up, but nothing has really been successful in awhile. Kind of depressing. I feel a purge coming before I brew again.

Update 10/18/16: Free pale ale wort from Raleigh Brewing: Racked to new carboy. Not clear at all, but it’s at 1.002 SG, so it’s probably done…just not sure, since it took so long and still had bubbles on the surface. OG was 1.053, according to the brewer, so that would make the ABV 6.69%. Looks and smells okay. Still bitter and not very  “interesting”, so I’m going to let it sit for a week or two and then dry hop with some Citra and maybe some Cascade. Should I put some “holiday spice” in it? I don’t know….

Standard
Uncategorized

Update on Mowing Mt. Ranier Cherry Citra Ale: Infection!

This is what infection looks like...damn it.

This is what infection looks like…damn it.

Well, I have my first confirmed infected beer. After racking the Mowing Mt. Ranier Cherry-Citra Ale, I noticed some patches on the surface the next day. Then, the following day, there was a complete film (a.k.a. “Pellicle”) covering the surface. I confirmed that it was on the small blackberry batch, as well.

What caused the infection? I don’t know. A fruit fly touching the beer during racking? A microscopic particle drifting in? Cherries weren’t properly sanitized? Sloppiness when transferring wort from kettle to fermenter? No way to know really. From what I understand, there are a few possible outcomes. I could put it in an out of the way place and let it go for a couple of years and hope that the infection is Brettanomyces strain and would slowly transform my beer into a mindblowing sour beer. It could be an acetobacter (commonly from fruit flies) that would basically turn the beer into vinegar. It could be something yucky than would just turn the beer into something disgusting. Finally, I could go ahead and try to siphon from under the pellicle and bottle the beer ASAP and cross my fingers. The eventual outcome could still be nasty, or it could be good initially and go downhill. Or it could get better with age. Again…no way to tell in advance. So, I’m going to bottle it. The next step, after that, will be replacing my siphon and tubing and bleaching the Hell out of my carboy and bottling bucket, and hoping to salvage them. Some say it should all be thrown away or only be used for sour beers. Others say bleaching works.

I was almost out of 12 oz bottles, but I have some 22 oz “bombers”, so I went ahead and bottled the little blackberry batch into 2 of those and one 12 oz. The beer seemed to taste okay still. Luckily, a brewer friend had a couple of cases of bottles that she gave to me…saving me a trip to the supply store and about $35 for 2 cases of bottles! So, bottling will be my project tonight. I’ll update later….

***Okay…it’s later. I bleached all my utensils and the bottling bucket, rinsed well and then sanitized again with Starsan. The bottles, I soaked in Arm & Hammer Super Washing Soda solution, rinsed well, and then sanitized with Starsan.I went transferred the beer to the bottling bucket with 3oz sugar dissolved in hot Culligan water. I collected 4 gallons to bottle. I tried to stop well before any of the stuff from the pellicle got too low. As the volume in the carboy dropped, the pellicle coated the sides.

The clarity and color were nice though...dang it!

The clarity and color were nice though…dang it!

Volume drops, pellicle coats sides.

Volume drops, pellicle coats sides.

I went through the bottling process and got 42 bottles (12oz). The beer is clear, the color is nice, the flavor is good. If it weren’t for the infection, I would have been really happy at this point! It is depressing though that the few bottles I did yesterday from the little blackberry variant were cloudy at the bottom and may have had some stuff floating at the top. It could be that it just had more crap in the smaller bucket and I wasn’t as careful getting it into the bottles. I’m keeping my fingers crossed for the main batch. I had intended to go light on the priming sugar, but I overestimated how much beer I would collect; so it turns out that I added the amount of sugar that would have been recommended anyway…though I was shooting for 2.2 atmospheres, which is a little under. I will have to watch for overcarbing.

Update 9/10/15: Refrigerated a bottle all day and opened it last night. Not carbed enough. I’m not sure it’s good enough to save, but I’ll give it a couple more weeks.

Standard