Uncategorized

Fluffernutter Sammie Stout Update

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Update 5/24/2016: An unexpected little run of cooler temperatures had me worried that the beer was not fermenting. I know it did for a couple of days, albeit a bit slowly…never really started “chugging”, but going. Then the cool weather, and my little fermentation chamber is outside. It is only able to cool, not warm, so this could be a problem. Since the overnight low last night was going into the mid to lower 50’s, I decided to bring the carboy inside.

I took a sample and did a temperature and hydrometer reading. The temp was 62.5, so it wasn’t terrible…a little under optimum range, but should not be low enough to have caused any harm. The hydrometer has the specific gravity at 1.030, so it definitely was fermenting. That’s good! Adjusting for the lactose, I think it will likely only go to 1.028 or so.

Hydrometer sample for evaluation...specific gravity, temperature and flavor.

Hydrometer sample for evaluation…specific gravity, temperature and flavor.

The flavor of the sample has my hopes up! The color may be a tad light, but it’s a little darker than the sample shows, because of the camera flash and the particles had not settled out yet. I could definitely taste the peanut flavor, especially in the finish. Nice malty sweetness. After the sample chilled overnight, the peanut flavor is more muted. With that and the consensus from others that the peanut flavor will start fading after a couple of months in the bottles, I do plan to add more peanut powder to secondary via boiling it with water and cooling it…probably a gallon and then racking onto it and the vanilla beans. I’m going to skip the marshmallow Fluff in secondary and rely on the vanilla for that flavor, so I’m not adding much more fermentable sugars. I may try adding some to the boil in a future batch, but not this time. I have a feeling that this beer’s flavor will improve as it loses some of its chill, after pouring.

The temperature on the carboy strip thermometer reads around 66-68F, so I’ll be putting it back in the fermentation chamber later today.

Advertisements
Standard
Uncategorized

Brew Day: Fluffernutter Sammie Stout

Set up to brew.

Set up to brew.

 

Finally! For the first time in 7 months, I brewed some beer! I created this recipe months ago and tweaked it some, but just didn’t want to brew again until I was able to control my fermentation temperatures. I have had ongoing issues with over-carbonation and I have had some off-flavors, particularly with darker beers…some are metallic or just very one dimensional. I have addressed everything I can, except fermentation temperature and yeast selection. For this sweet stout, I decided to go with Wyeast 1968. Optimal temperature range is around 64 to 70F. So, instead of my normal household room temperature of around 72F, with wort temps reaching 75 to 78, I now have a small chest freezer with controls to regulate the temperature. I have it set at 63-64F. I’m hoping this will at least help the flavor of the beer. If it helps with the carbonation issue, too, then that would be awesome!

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

http://www.brewersfriend.com/homebrew/recipe/view/295261/fluffernutter-sammie-stout

I did have to make some minor changes based on homebrew shop ingredients availability…nothing major. Brew day went very smoothly, except for mash temperature climbing to 160F, instead of 155F. With about 25 minutes left, I removed the insulation/lid and started stirring to lower the temperature. With 10 minutes left, it was down to 156-157.

Brew in a bag...the "mash in".

Brew in a bag…the “mash in”.

My understanding is that the effect would be less fermentable sugars and possibly a little sweeter finish. I also added lactose with 10 minutes left in the boil. The end of the boil was fine, except the OG was high. I have a feeling that the lactose is not figured into the refractometer/hydrometer readings, because otherwise, it looks fine.

The boil is done.

The boil is done.

As a result of being able to drop the temperature to 71-72F, pitch the yeast and drop the carboy in a 64F fermentation chamber, the “take-off” for the yeast was barely noticeable 20 hours later. There was just a ring of bubbles around the top inside of the carboy. Now, at about 26 hours, there is audible bubbling and more visible signs of fermentation.

Controls to convert the freezer to a fermentation chamber.

Controls to convert the freezer to a fermentation chamber.

My concerns, at this point, are whether or not I added enough peanut powder to be noticeable in the final product, and if the vanilla planned for secondary will give the marshmallow flavor. A couple little sips of the wort towards the end of the boil did not really convince me on the peanut powder…and what IS marshmallow flavor? Marshmallows are basically corn syrup, sugar, gelatin, and vanilla. I’ll investigate some more and see if peanut powder can be effectively added during primary or secondary fermentation, as well as exploring the marshmallow flavor a bit more. If I make changes, I will definitely update the recipe. For tonight, it’s reading, while the fermentation builds.

 

 

Standard
Uncategorized

Day 89 Bottling Costa Kona Mocha Latte Stout

IMAG2841

At this point, I’m not going to go into all the cleaning, bottle washing, setting up stuff. I’ve gone over all that before…don’t skip it, it’s important! Sample of the final product has an FG of 1.022 and is a nice deep cola color with good clarity. I calculate the ABV to be 5.38%.

IMAG2837

I used 2-1/2 oz of corn sugar in 8 oz of very hot water to the bottling bucket. (Trying to adjust the carb level to the beer style…I hope this turns out well!)  I topped that with 1 quart of cold brewed Kona blend coffee concentrate and then racked the beer from secondary off of the cocoa nibs and into the bottling bucket, blending well.

Cold Brewed Coffee Concentrate and Corn Sugar in hot water.

Cold Brewed Coffee Concentrate and Corn Sugar in hot water.

I decided to do half the batch in 22 oz “bombers” and the rest in regular 12 oz bottles. Unfortunately, my bench style capper messed up on my first bottle. I haven’t tried to figure it out yet. All my beer was in the bottles and I didn’t want to take too long and risk contamination, so I used the handheld capper. It wasn’t too bad. I wound up with 1 case of 12 oz bottles plus 2 extra bottles (26) and 1 case of 22 oz bottles plus one extra bottle (lucky 13).

To celebrate, I popped open a bottle of Troegs Java Head. Dayum, this stuff is good! My Costa Kona Mocha Latte Stout will be sweeter and include chocolate with the coffee…and I think it will be very good; but let’s be honest, it’s not going to be Java Head good!

This is great stuff...what my brews dream of being!

This is great stuff…what my brews dream of being!

Standard
Uncategorized

Day 88 Bottling Murray’s Super Easy Cider, 1/2 gallon

Murray's Super Easy Cider

Murray’s Super Easy Cider

After returning from a vacation, my Murray’s Super Easy Cider is ready to bottle. I don’t want to waste any by checking the FG…just have to guess. But it doesn’t really matter. I didn’t have a helper and starting the siphon was a pain in the butt and stirred up a small amount of lees…not too bad though. I got five 12 oz bottles out of the little 1/2 gallon batch.

Lees on the bottom, after siphoning cider into bottles.

Lees on the bottom, after siphoning cider into bottles.

A little ring in the neck, them fairly clear. Layer of lees on the bottom.

A little ring in the neck, them fairly clear. Layer of lees on the bottom.

It’s getting a little late in the day to bottle my Costa Kona Mocha Latte Stout tonight. I’ll do it soon though…tomorrow or this weekend. I would like to do my first all-grain Brew in a Bag (BIAB), but I’m not sure if I’ll have time this weekend. We’ll see.

Meeting my brew-buddy to deliver some goodies she wanted, that I picked up while on vacation.

Swag!

Swag!

IMAG2832

Of course I picked up some for myself as well! The highlight and big deal is Nugget Nectar from Troeg…along with a few other bottles. Also a few bottles from Appalachian and Lancaster Brewing Companies.

Standard
Uncategorized

Day 87 Racked Costa Kona Mocha Latte Stout to Secondary

End of primary fermentation for the Costa Kona Mocha Latte Stout.

End of primary fermentation for the Costa Kona Mocha Latte Stout.

It’s time. Racked the Costa Kona Mocha Latte Stout onto the Costa Rican cocoa nibs that I have had soaking in vodka for a few days, after I toasted them briefly to bring out the flavors. The primary bucket had a bunch of coagulated looking trub that looked like browned hamburger in grease.

Cocoa nibs in a sanitizing/extracting  soak in vodka

Cocoa nibs in a sanitizing/extracting
soak in vodka

Is that hamburger? Nope...that's some serious trub.

Is that hamburger? Nope…that’s some serious trub.

But the beer is coming along nicely, I believe. Secondary should go a week or so and then it will be on to bottling with the cold brewed Kona blend coffee concentrate (4 cups).

I’m a bit bugged by a little mystery. I keep an inventory of what I have on hand in brews. Last night, I pulled a few things to refrigerate and drink and I adjusted my inventory. I looked in the fridge tonight and found a bottle I thought I had drunk last night. I checked my inventory and it is accurate. What I  have left in the fridge is accurate, except for this extra bottle. So, what the heck was that bottle I drank? I have this single bottle of a strawberry lemon experiment that I did. I also did one that was just lemon. I didn’t even put them in the journal, because they were just single bottles. It was fresh lemon juice, water, sugar and a little yeast. I somehow had some small amount of strawberry for the second bottle…can’t even remember now. I thought I drank the strawberry one last night. It was weird because it was kinda crazy carbed…DSC04348

crazy carb on this mystery bottle.

crazy carb on this mystery bottle.

and heavier on the strawberry than I expected. I also thought I was getting some hops, which I did not use on this cider-like fermentation. If I didn’t know better, I would think that I had opened a strawberry blonde that I just bottled a couple of days before…but they’re all accounted for…unless I had a brain fart and stuck one in the fridge when I was bottling or put one back in the inventory stuff without counting it. Anyway, it’s a mystery…but I have the strawberry lemon experiment right here. It’s clear, light golden and lemony, but dry with a fairly strong sparkle. Clean and fresh.

Strawberry Lemon Experiment

Strawberry Lemon Experiment

Not getting the strawberry, but it doesn’t really suffer without it. I really should have documented this, even though it was a tiny experiment. Ah well…live and learn. Relax…and have a home brew (or ferment)!

Standard
Uncategorized

Day 86 Update Murray’s SEC (Super Easy Cider) and Mocha Latte Stout

The Costa Kona Mocha Latte Stout seems to still me sending some gas up and pushing the lid a little. It’s not coming out the airlock, though, unless I press on the lid. I figure it’s not going to hurt it to sit another day or two in Primary. I found some vodka…an old bottle of kinda cheap stuff…but it will work for soaking the Costa Rican cocoa nibs. I slowly heated a saute pan on the stove with the cocoa nibs, over low heat until I could smell the chocolate and they had changed to a shiny, dark brown color.

Putting a little heat to the Costa Rican cocoa nibs to bring out the flavor.

Putting a little heat to the Costa Rican cocoa nibs to bring out the flavor.

I dropped them into a little storage container with about a cup of vodka, covered and I’m allowing them to steep at room temperature.

Doing a sanitizing/extracting  soak in vodka

Doing a sanitizing/extracting
soak in vodka

The SG is at about 1.023 @72F; so  1.024  corrected for temperature.(I actually measured 1.022 on 3/12 and I know it isn’t going up, so let’s go with that.) Still, another day won’t hurt. The estimated FG for the recipe is 1.015, but since I added 1 lb of lactose instead of 8 oz, that could account for the difference. If 1.022 winds up being the FG and the beginning was 1.062, then the ABV will be 5.25%. If it’s the higher FG, then the ABV would be right at 5%. That’s good, either way. The flavor, based on the sample, is very good. I already taste the chocolate, just from the husks. After the secondary on the nibs and the cold brewed coffee concentrate at bottling, this beer has great potential!

Sampling for hydrometer (and tasting!).

Sampling for hydrometer (and tasting!).

The Murray’s SEC 1/2 gallon has a nice, slow bubble happening in the airlock. I think it was about the same last time, so that should be good.

Standard
Uncategorized

Day 83 Brew Day Costa Cocoa Milk Stout

Ingredients for Costa Cocoa Milk Stout

Ingredients for Costa Cocoa Milk Stout

Brew Day 3/8/14   I think I am far enough along to breeze through the basic details. The basic brew went well, except I added 1 lb of lactose instead of 8 oz. From what I have heard, that should not be a problem. Maybe a slightly higher gravity. I started the grain steep with 3 gallons of water @ 155 for 30 minutes. I did do my little mini sparge set up. I used a bottling bucket with hose and gravity drained 2 gallons of water @ 168F over the grain sock.

Mini sparge for the grain sock. Hey, why not?!

Mini sparge for the grain sock. Hey, why not?!

Creative little mini sparge

Creative little mini sparge

Boiled for 60 minutes following directions for additions. Ice bath chilled to 125F, added 1 gallon of cold water to top-off at 5-1/2 gallons. Temp was still at 100F. So I returned the bottling bucket that I’m fermenting in, to the ice bath.

The Boil

The Boil

When I got it to 75F, I pulled a sample for specific gravity check and pitched the yeast (I rehydrated the Safale s-04 yeast in 4 0z of 75F water). Popped on the lid and airlock and I aerated for 5 minutes. Finished shortly after 5 pm.

I checked the OG with my new refractometer: 1.063/1.064 (those numbers are SO small!) and hydrometer: 1.060 at 80F, adjusted to 1.062…so, pretty close to each other. The original specs called for 1.053. I imagine the difference can be accounted for with the extra lactose and maybe a little better efficiency on the grain steep resulting from the mini sparge technique(?).

The hydrometer OG check

The hydrometer OG check

Update 3/9/13   9 p.m.   The wort began to ferment late last night and became pretty strong by this morning. I was away from the house for several hours and returned to find a very small amount of krausen in the airlock. It may not be necessary, but I went ahead and set up a blow off. I have 1 quart of cold brewed Kona blend coffee in the refrigerator. That will be added at bottling, after a secondary on Costa Rican chocolate nibs. This brew will eventually be “Costa Kona Mocha Latte Stout”. Did I mention that I love sitting here and writing and being able to hear the blow off chugging away in the next room? Yeah…love it. And having a glass of my homebrew Citra Citrus American Wheat doesn’t suck, either!

Citra Citrus American Wheat...Man, I love this beer!

Citra Citrus American Wheat…Man, I love this beer!

By the way, the strawberry blonde is continuing to clear in secondary. I’m thinking it should be ready to bottle by next weekend. The small batch of Plain Jane Blonde is in a plastic bucket, so I can’t see it; but I assume it is at least as clear as the strawberry. Maybe I’ll bottle that later this week, just to break things up a  bit. There’s about 6 gallons of strawberry, so that’s going to take awhile. The plain is only about a gallon and a half.

Strawberry Blonde Ale, secondary for clarification.

Strawberry Blonde Ale, secondary for clarification.

I hadn’t thought about it before now, but I’ll need to do some math on the corn sugar amount for bottling these blondes, since both are substantially off from the 5 gallon mark.

Standard