Uncategorized

Day 113 Brew Day!!! Something a Little Different. Rye PA?

The set-up.

The set-up.

It’s been a long brew day. I slept late and got a late start. After getting an idea about what I was going to brew, running to the local brew shop, topping of the propane tank and getting ice, I still had to organize, set-up and sanitize! I think I finally turned the burner on at about 2 p.m. I just finished…well, still have some more clean up to do…and it’s 7:45 p.m.

I was hoping to make a scotch ale; however, the recipes and comments I was hearing were all pretty much saying that I needed to be able to maintain a fermentation temperature of 68F for the first week and sometimes down in the 50’s for another 10 days. Since I don’t have anyway of temperature regulation, I decided I needed to go another way. In looking at styles that do better in warmer temperatures, I found a recipe for a wheat beer, with an option for rye, that sounded interesting. So, I started tweaking it and headed for the HBS to get further  input.  The original recipe I found is here:

http://thebrewhut.com/brewblog.php?page=recipeDetail&&filter=brewmaster&id=62&pg=2

I always like to give credit to originator! So, here’s what I did. First, I went with regular wheat, not red. Maybe some other time. I also decided to pick up some Citra hops, because I really liked what they did for a similar brew. I also remembered that I had a little Vanguard hops left in the freezer at home. And rather than go with a Weihenstephaner yeast, I decided to go US-05. This should help with my higher fermentation temperatures. For the honey in the recipe, I opted for orange blossom and instead of Lemon Zinger Tea, I’m going for Lemon zest soaked in vodka for the secondary…maybe some orange zest, too. Maybe I’ll call it “Rye Sense of Humor American RyePA”.

Gots all my pertinents and such.

Gots all my pertinents and such.

On to the brew: I pretty much followed the recipe. There are two hops varieties in addition to the hops I decided to add. Bittering hops at 60 minutes, Cascade. Aroma hops at 30 minutes and 5 minutes, Hallertau and again at 5 minutes.  I added the Vanguard at the 30 minute marks, as well and the citrus at flameout.

My BIAB process went pretty smoothly, except it is hard to nail down that target temperature and regulate it there. I heated the strike water to 168 (a tad higher than I anticipated). I let it come down a little  before adding the grains. The grains only got it down to around 158F. I left the lid off and stirred a lot to try to bring it down to 152F. I went through that a couple time before it was ready to mash out.

Boil in a Bag, all-grain.

Boil in a Bag, all-grain.

The mash out, on the other hand, went smoothly. I hit the temp and I was able to maintain it pretty steadily for 15 minutes. Then it was on to the boil. I started with 7 gallons and went through most of the process as planned.

Dunking and draining...no sparging.

Dunking and draining…no sparging.

DSC04805

 

I did, however, have in my mind that the last two BIAB brews I did have a bunch of trub and tit really cut into the amount of beer I made. So, at the end, I added a gallon of  cold water which, of course, dropped my specific gravity reading.

I decided to pull a gallon of wort and re-boil it with another 1/2 pound of honey and a 1-3/8 oz chunk of piloncillo (Mexican raw sugar). I chilled that down and added it back. The refractometer was reading 1.047…I did a hydrometer check and it was reading 1.050 at 73F…that would be 1.051 corrected for temperature. Anyway,  I took one last refractometer reading and, low and behold, it matched the hydrometer at 1.051! I stuck the rest of the sample in the fridge to check the color later.

The Boil

The Boil

I had already rehydrated the yeast, so I went ahead and pitched it. Then I rocked the fermention bucket for 5 minutes to aerate. I’m going to go ahead and put a blow-off tube on this bucket, because it is pretty full. It would not take much krausen to foul an airlock!

Blow-off, in place and ready.

Blow-off, in place and ready.

Now it’s time to finish up a little cleaning before I yawn myself to sleep!

Update: Sample tube…clear separation. Lots of trub! I really like the flavor of this wort…this has great potential!

Wort hydrometer sample...checking for trub, color, aroma, flavor.

Wort hydrometer sample…checking for trub, color, aroma, flavor.

 

Standard
Uncategorized

Day 91 Brew Day, First All-Grain, Brew in a Bag!

Brew in a Bag (BIAB), all-grain.

Brew in a Bag (BIAB), all-grain.

Today was my first experience with an all-grain brew! I took a class and got supplies a couple of weeks ago and today was a beautiful day for brewing. I probably wouldn’t get another chance for a couple of weeks, so I went for it.  Everything went surprisingly well. The target temperature for the mash in was 150 F. That was supposed to be accomplished by adding the grain to the full volume of water ( 6.25 gallons) heated to 158F. The temperature actually went to 155 and didn’t get down to 150 until the last 15 out of 60 minutes with no heat on.

The set-up.

The set-up.

I dunked and drained the bag a few times. The refractometer showed an SG of around 1.042…supposed to end up at 1.053, so I was a little worried. I put the bag back down in and raised the temp to 168F  to mash out.

Saccharification...ooo!

Saccharification…ooo!

Next, I cut the flame and allowed the bag to drain well…SG still looked low.

Drain the grain.

Drain the grain.

I went ahead with the 60 minute boil and hop additions at 60, 15, 5 and 1 minutes. I also added 1 teaspoon Irish Moss with 15 minutes left to boil. With the concentration from the boil, the SG was up to about 1.062.

Boil.

Boil.

I did the ice tub chill-down of the wort and it went reasonably quickly. I rehydrated the dry yeast in water while I finished cooling the wort. I then transferred the wort to a bottling bucket for primary fermentation. I wound up with just under 5 gallons. I added water to bring it up to about 5-1/2 gallons and the FG nailed the 1.053 target! (Using my hydrometer and correcting for temperature.) The sample was malty/sweet (which will convert) and very tasty. It actually separated pretty quickly and the wort is a nice color.

Nice color in the sample.

Nice color in the sample.

I put the sample in the fridge to look at/taste again later. I pitched the yeast at about 1:45 pm. Over the next few hours, I did not see any action in the airlock and I noticed a small drip around the spigot. I decided around 7:00 pm, that I should go ahead and transfer to another bucket, since efforts to tighten the spigot did not stop the leak. I took advantage of the opportunity to aerate some more in the process of the transfer. I also realized that the temperature in the house had gone up to 77F, so I turned on the A/C. Crossing my fingers that I get some action overnight. I am a little concerned with the temperature fluctuations. The wife will complain about the house being too cold and how much it costs, when she gets home from a business trip in a couple of days. Then the temp will go up again. The yeast’s  upper range is up to 71F  for fermentation temps, ideally. It could have an effect, but it should be ok, at worst. (I hope!)

Standard