Today was National Homebrew Day and I celebrated by brewing at Atlantic Brew Supply’s “Big Brew” event in the Raleigh Brewing Company’s brewery. The recipe I chose is a Saison called Legends Never Die and the 1/2 price deal came up to just over $15 for a 5 gallon recipe. As has been usual for awhile now, I used the Brew in a Bag (BIAB) method. The grain bill is North Carolina sourced, the yeast is Belle Saison, and the hops are an ounce of Cascade @20 minutes, a half ounce of Nugget @ 10 min and again @ 5 min. A final 1 ounce dry hop addition is done at secondary fermentation for 10 days.
Raleigh Brewing Company/Atlantic Brew Supply Big Brew
The brewing process went pretty smoothly. The brewery hot water was already above 130F, so strike water reached temperature quickly. As usual, I went over my target temperature for mash in, but I added a little cold water and got it right within a few minutes.
I did a mash-out this time to 172F for 10 minutes and sparged with 2 gallons of the brewery hot water. When I was ready to boil, it seemed to be taking a little time, so I started making some notes…next thing I knew, I had a little boil-over. On the plus side, it provided a pretty clean break and I had a nice boil for the rest of the time.
Ready to boil
I did get a little pop while stirring and got a mild burn on my right hand. It really only hurts when exposed to steam or warm water. I have found that stirring enough to create a whirlpool in the wort while it’s boiling, creates these pops of hot wort that can splash out of the kettle. I used my refractometer to check the specific gravity (SG) and is a little under the projected 1.063…I got 1.058. I’m good with that for my original gravity (OG). A friend had to add a pound of DME (Dry Malt Extract) to get to 1.060, so I don’t feel too bad.
After the boil, I used one of the brewery’s wort chillers and brought the temperature down to about 72F…took about 15 minutes or so. Then I siphoned the wort into my plastic carboy, aerated it with the oxygen cannister for about two minutes, and then pitched the yeast.
Done! Time for clean-up.
Clean up went pretty quickly and I strapped my carboy into my van for the trip home. Done! I arrived at the brewery at 9 a.m. and left right at 2 p.m. Five hours on the button.
Strapped in for the ride home. Click it or Tip it!
I checked on the carboy around 7 p.m. and didn’t see much action, but it looked okay. An hour later, the krausen had literally created a layer on the top of the wort that was about a finger thick!
Belle Saison yeast is a monster!
Time to install a blow-off set-up, before it fouls the airlock!
Blow-off set-up installed.
And it’s time for some Aleve. Happy National Homebrew Day!