Uncategorized

Day 170 Racking East Coast Cascade Waterfall Off of Dry Hops

 

Dry hop bag removed and opened...dried leaf Cascade used for dry hopping in secondary.

Dry hop bag removed and opened…dried leaf Cascade used for dry hopping in secondary.

I’m running a day behind on getting the East Coast Cascade Waterfall American Amber racked off of dry hop…but that never hurt anybody, right? I started at a little before midnight and finished up after midnight. So, I decided to have one of my Scottish Samhain Pumpkin Ales while I worked.

Scottish Samhain Pumpkin Ale...wet the whistle while you work!

Scottish Samhain Pumpkin Ale…wet the whistle while you work!

Side note: The person whose recipe I used for the Scottish ale base, received a package from me with two bottles of the Scottish Samhain Pumpkin Ale (along with a Cherry Belle Saison and a Hi-Nelson w/Hibiscus). I was very happy to see that he drank one of the Scottish Pumpkin Ales and said that he was genuinely impressed! He described it as “Very Scottish, nicely pumpkin. Aroma is almost like pumpkin pie and a fresh pretzel.” It has a …”sturdy backbone, body, and face for the spice to play with.”  Awesome!

Back to the East Coast Cascade Waterfall American Amber Ale: I just set up a tube on one bottling bucket and transferred the contents, after removing the nylon bag with the Cascade dried leaf hops.

Bucket to bucket for racking from secondary to tertiary to settle for a couple days.

Bucket to bucket for racking from secondary to tertiary to settle for a couple days. Hmmm…how did that blue ribbon from my crab apple jelly entry from the NC State Fair sneak into the photo?

All the indicators are positive…I believe this will be a nice, sessionable, easy-drinking brew, with a nice balance of hops and malt…not too bitter. I was pretty reserved with the bittering hops. For a partial mash, experimental small batch, I think this beer is going to be pretty good.

Small sample of East Coast Cascade Waterfall. Tasty!

Small sample of East Coast Cascade Waterfall. Tasty!

After transfer, I have about 2.75 gallons. I believe there will be about 2.5 gallons to bottle, which I should be able to do Monday. I took a small sample to taste, but I added it to the hydrometer sample after a tiny sip. The sample I took for a hydrometer reading was from the dregs and was pretty cloudy, but it came out to 1.014, after temperature correction. I refrigerated the sample to let it crash and settle. I’ll check it again tomorrow and get a better taste, as well.

Advertisements
Standard
Uncategorized

Day 169 Racking the Eastern Cascade Waterfall Amber (Hops Experiment)

Trub in the bottom of primary fermentation bucket after racking.

Trub in the bottom of primary fermentation bucket after racking.

It’s Sunday and the Eastern Cascade Waterfall American Amber has slowed way down on fermentation action, so I racked to secondary. The hops experiment continues. I used 1/2 oz fresh Cascade hops that were vacuum sealed in jars and frozen…that went in the thirty minute boil at the beginning. Then, I added 1 oz fresh Cascade hops that partially dried on the bines and finished drying in my attic at the 15 minute point. Now, I’ve added another ounce of the dried ones to secondary for dry hopping.

Racked onto 1 oz dried Cascade hops.

Racked onto 1 oz dried Cascade hops.

I’m anticipating a 5 day dry hop and either bottling or racking and another couple of days to settle. I’ll make that decision after the dry hop.

I took a sample to check the specific gravity (SG) and the reading was 1.014 at 68.2 F, so it would be 1.015 after adjustment for temperature.

Hydrometer sample.

Hydrometer sample.

That is exactly the estimated FG for the recipe. The color looks good…nothing off in the aroma. I refrigerated the sample to settle and chill and I’ll try it again later, but the initial sip of the sample seems pretty good. I’m not expecting a WOW! beer from a mostly DME brew (dry malt extract), but it seems pretty good.

Standard
Uncategorized

Day 168 Brew Day! Partial Mash with Cascade Hops Experiment

Ingredients for an experimental partial mash brew, with DME, grain steep and whole frozen hops and dried hops.

Ingredients for an experimental partial mash brew, with DME, grain steep and whole frozen hops and dried hops.

I have a friend whose son started planting Cascade hops in her garden four years ago. This year, he got a job at a brewery, out of town and wasn’t going to be around to harvest the hops. I was invited over to pick some. Fresh hops! What to do, what to do? I wasn’t ready to use them. I had never used fresh hops before and had no clue how to handle them. Thinking that the best thing was to have them as fresh as possible, I vacuum sealed them in canning jars and put them in the freezer.

Jar of whole hops that was vacuum sealed and frozen.

Jar of whole hops that was vacuum sealed and frozen.

I subsequently heard from a number of people that freezing fresh hops was not a good decision. They would likely become soft and slimey. Flavor was a  big question. One recommendation was to keep them frozen right up until putting them into the boil. So, that’s what I did…right into a little nylon bag and tossed right into the boil.

Some time later, my friend said I should come pick some more. When I arrived this time, instead of big, green cones, most of the hops were drying and turning brown. In addition, it was misty that morning and the “dry” hops were damp. I brought them home and put them in a large cardboard box and put them in the attic to finish drying. After several days, they were nice and dry, but I was concerned about the browning. They had plenty of appropriate aroma, though.

Since I have recently finished up some projects and had some Dry Malt Extract (DME) and a couple kinds of yeast on hand, I decided to try a smaller batch of beer and use some of each of the styles of Cascade hops, vacuum sealed frozen and vacuum sealed dried. I worked on a partial mash recipe and created an American Amber Ale that I’m calling Eastern Cascade Waterfall Ale. The yeast is a White Labs East Coast Ale yeast.

Boiling with the bags of hops...this is just after the 15 minute addition.

Boiling with the bags of hops…this is just after the 15 minute addition.

Eastern Cascade Waterfall Ale (American Amber, Single Hop, Partial Mash)

Batch size 3 gallons, 30 minute steep, 30 minute boil

Fermentables:

3 lb DME-Pilsen, boil 30 minutes

8 0z DME-Light, boil 30 minutes

1 lb American-Caramel/Crystal 60L, Grain sock steep 30 minutes @150F in 3.5 gallons strike water

Hops:

0.5 oz Cascade Fresh/Wet (Note: I used frozen, vacuum sealed in a jar.) Boil 30 minutes (in nylon bag)

1 oz Cascade Dried, Whole/Leaf,  Boil 15 minutes (in nylon bag)

1 oz Cascade Dried, Whole/Leaf, Dry hop (in nylon bag) in secondary, 5 days

Other:

Irish Moss (fining) Boil 15 minutes

Yeast: White Labs East Coast Ale Yeast, 1 vial, Optimum temp. 68-73F, 72.5% attenuation    (Note: I used harvested yeast and prepared a starter.)

Original Gravity: 1.053,      Final Gravity: 1.015,       ABV 5.04%     IBU (tinseth) 36.99     SRM (morey) 12.69

After the boil, I chilled to 68F in an ice water bath and tranferred to a bottling bucket for primary fermentation. I had a little under 3 gallons of wort, so I added enough Culligan bottled water to top it off to 3.25 gallons. The plan is to have 3 gallons to bottle after racking to secondary. I aerated with an oxygen stone for 2 minutes (or you could agitate/rock for 5 minutes).  Yeast pitched and fermentation bucket sealed and an airlock was installed at 1:05 pm.  As of 8:30 pm, signs of activity were evident in the airlock, though not aggressive. Unfortunately, I have no idea of the pitch rate. That’s one area (of several) that I have had no experience with figuring out.

Initial impression was positive…no weird or off flavors or aromas were noticeable. Color is a nice brown; perhaps a little darker than I anticipated, but all the indicators match the American Amber style, according to my recipe calculator. I did hit my Original Gravity (OG) number pretty closely. The recipe calls for 1.053 and I measured mine at 1.055 on my refractometer. Good brew day!

One update: the Scottish Samhain Pumpkin Ale has been in the bottles for 11 days now. I opened one of my two test bottles, at room temperature, and poured a small sample. The sample looked clear and, frankly, the aroma and flavor are amazing.

Finshed the chilled bottle later.

Finshed the chilled bottle later.

Scottish Samhain Pumpkin Ale sample.

Scottish Samhain Pumpkin Ale sample.

I recapped the bottle and stuck it in the refrigerator for later. I did open and drink the rest of the bottle tonight and my assessment stands. It is low on the carbonation, though not flat.  I hope that the carb will continue to improve over the next few weeks.

Update on the Eastern Cascade Waterfall: By 8 pm, there was sign of action in the airlock, but it was slow. By the morning after brew day, the airlock is happily chugging away, so my yeast starter appears to be a success!

Update 10/30/14: Eastern Cascade Waterfall Amber airlock action is slowing to a crawl. Probably going into secondary Sunday. Might just get it bottled by middle or end of next week. Lots of choices for Thanksgiving this year!

 

Standard
Uncategorized

Day 83 Brew Day Costa Cocoa Milk Stout

Ingredients for Costa Cocoa Milk Stout

Ingredients for Costa Cocoa Milk Stout

Brew Day 3/8/14   I think I am far enough along to breeze through the basic details. The basic brew went well, except I added 1 lb of lactose instead of 8 oz. From what I have heard, that should not be a problem. Maybe a slightly higher gravity. I started the grain steep with 3 gallons of water @ 155 for 30 minutes. I did do my little mini sparge set up. I used a bottling bucket with hose and gravity drained 2 gallons of water @ 168F over the grain sock.

Mini sparge for the grain sock. Hey, why not?!

Mini sparge for the grain sock. Hey, why not?!

Creative little mini sparge

Creative little mini sparge

Boiled for 60 minutes following directions for additions. Ice bath chilled to 125F, added 1 gallon of cold water to top-off at 5-1/2 gallons. Temp was still at 100F. So I returned the bottling bucket that I’m fermenting in, to the ice bath.

The Boil

The Boil

When I got it to 75F, I pulled a sample for specific gravity check and pitched the yeast (I rehydrated the Safale s-04 yeast in 4 0z of 75F water). Popped on the lid and airlock and I aerated for 5 minutes. Finished shortly after 5 pm.

I checked the OG with my new refractometer: 1.063/1.064 (those numbers are SO small!) and hydrometer: 1.060 at 80F, adjusted to 1.062…so, pretty close to each other. The original specs called for 1.053. I imagine the difference can be accounted for with the extra lactose and maybe a little better efficiency on the grain steep resulting from the mini sparge technique(?).

The hydrometer OG check

The hydrometer OG check

Update 3/9/13   9 p.m.   The wort began to ferment late last night and became pretty strong by this morning. I was away from the house for several hours and returned to find a very small amount of krausen in the airlock. It may not be necessary, but I went ahead and set up a blow off. I have 1 quart of cold brewed Kona blend coffee in the refrigerator. That will be added at bottling, after a secondary on Costa Rican chocolate nibs. This brew will eventually be “Costa Kona Mocha Latte Stout”. Did I mention that I love sitting here and writing and being able to hear the blow off chugging away in the next room? Yeah…love it. And having a glass of my homebrew Citra Citrus American Wheat doesn’t suck, either!

Citra Citrus American Wheat...Man, I love this beer!

Citra Citrus American Wheat…Man, I love this beer!

By the way, the strawberry blonde is continuing to clear in secondary. I’m thinking it should be ready to bottle by next weekend. The small batch of Plain Jane Blonde is in a plastic bucket, so I can’t see it; but I assume it is at least as clear as the strawberry. Maybe I’ll bottle that later this week, just to break things up a  bit. There’s about 6 gallons of strawberry, so that’s going to take awhile. The plain is only about a gallon and a half.

Strawberry Blonde Ale, secondary for clarification.

Strawberry Blonde Ale, secondary for clarification.

I hadn’t thought about it before now, but I’ll need to do some math on the corn sugar amount for bottling these blondes, since both are substantially off from the 5 gallon mark.

Standard
Uncategorized

Day 82 Working Out Details on Costa Cocoa Milk Stout

I got this kit for my birthday. I’ve never used a couple of the ingredients in this recipe before…Costa Rican cocoa husks & cocoa nibs, and lactose (milk sugar). Sounds good, though! While doing some reading, I came across information regarding hazelnut extract…I’m thinking Nutella Stout. After mulling it over a bit, I decided to skip the trip to the brew shop for the extract because I thought it might just get to be too sweet and might not taste natural.

After some more thought…and realizing that I had a bunch of whole bean coffee on hand that I got on sale…I started looking into using coffee as an additional ingredient. Natural, not adding more sweetness, adding caffeine and making this recipe a “mocha”. Yup. That’ll do! So, I sent a message to some local brewery people for advice. They suggested making a cold brew coffee concentrate and using about an 8% by volume at bottling. I never would have thought of that! I’m actually going to go about 4 cups of concentrate, rather than 6 cups…I can always add more, but I want the chocolate to still come through.

Everthing sanitized! Coarsely ground Kona blend coffee going into Culligan water for 15 hours.

Everthing sanitized! Coarsely ground Kona blend coffee going into Culligan water for 15 hours.

I found a cold brew coffee recipe online from Bon Apetite  (giving credit, where due!). I adapted it to brew in a gallon carboy with an airlock, instead of some other container covered with cheesecloth. I coarsely ground 12 oz of Kona blend coffee and added it to a sanitized carboy and capped it.

Ready to cap it and swirl it.

Ready to cap it and swirl it.

Shook it up and swirled to get as much of the grounds off of the bottle as I could and then replaced the cap with a sanitized  airlock. After 15 hours at room temperature, I’ll strain out the grounds and then filter the liquid through multiple layers of cheesecloth. (If I were concerned about it being crystal clear, I would filter it through a coffee filter…slowly. I think going through a sieve and then through thick cheesecloth will be fine.) I am going to use a teaspoon of Irish moss in the boil, just to help the beer clear a little, but I’m not expecting to see through it…it IS stout, after all.

Brewing...of a different kind!

Brewing…of a different kind!

So, what I’ll be brewing will be a “Costa Kona Mocha Milk Stout”. I’m sure I’ll be sampling it as soon as I can, but I think this one might need to age until next December-ish. I think the caps that came with the kit are the “oxygen absorbing” kind…good for longer storage. Brew Day tomorrow, if I can fit it in!

Standard