Uncategorized

Raleigh Brewing Company Free Wort Giveaway; Railer’s Pale Update

 

Raleigh Brewing Company wort.

Raleigh Brewing Company wort.

I picked up 5 gallons of free wort from Raleigh Brewing Company today…was supposed toget some awhile back, but they ran out. They were nice enough to make more specifically for the people that missed out, so I got some today! The recipe is not exactly known, but it is basically 2-row malt and a little Crystal 10L, from what I was told, with 3 additions of Willamette hops. I’m using Wyeast American Pale Ale 1272 yeast again and fermenting in the mid to upper 60’s F range. Pitched the yeast at about 3;45 pm. I’m going to keep this one simple. No adjuncts, no racking until bottling. And back to corn sugar for priming, to make sure I’m getting it dissolved well…could be an issue with table sugar priming. I think I’ll boil water to dissolve it in first and rack onto it, just to be sure the primer is evenly dispersed.

Update on Railer’s Pale Ale: kegged for the event. I put it in a friend’s keg, who will be donating to the event as well, and helping me with mine…since I know nothing about kegging. The event is Sept 24, for the Carolina Railhawks Soccer fans. “Soktoberfest”. There is a small (I hope) issue…there was a thin “skin”on top of the beer that had just formed in the last couple of days…signs of infection. It tasted okay though, and after discussing it, my friend said she would go ahead and keg it. We will keep our fingers crossed. One possible cause is that the hose I racked with was too short and allowed too much oxygen into the beer at racking, which would encourage an infection. So, I bought some longer tubing at the home brew shop today.

Update 10/8/16: Railer’s Pale Ale: A.L.E. decided that, despite the fact that this event has been done for 3 years, this year they won’t allow it. “Homebrew beer is for at home.” So, now I have about 4-1/2 gallons of beer with no plans, and it’s kegged at a friend’s house. No idea what to do with it. Probably bottle a little bit from the keg and screw the rest. I have too much taking up space as it is. And, in the fermentation chamber, the wort I got two months ago from Raleigh Brewing Co., seems to be continuing to ferment. WTF?! Possible infection, but it tastes okay and there’s no pellicle…just some bubbles. It’s a little bitter for a pale ale, but otherwise okay. I wasn’t planning on messing with it, but it might benefit from some dry hopping with something like Citra, to cut that bitterness and give it a little more aroma and flavor. At some point, I may have to cold crash it…worried about priming/bottling and creating bottle bombs…Hell, I may just dump  it and skip brewing for awhile. Maybe get some new hardware and reduce the threat of infections via tubes, siphons, buckets, carboys, etc., that I’ve had for a few years now. I was excited to get the fermentation chamber set up, but nothing has really been successful in awhile. Kind of depressing. I feel a purge coming before I brew again.

Update 10/18/16: Free pale ale wort from Raleigh Brewing: Racked to new carboy. Not clear at all, but it’s at 1.002 SG, so it’s probably done…just not sure, since it took so long and still had bubbles on the surface. OG was 1.053, according to the brewer, so that would make the ABV 6.69%. Looks and smells okay. Still bitter and not very  “interesting”, so I’m going to let it sit for a week or two and then dry hop with some Citra and maybe some Cascade. Should I put some “holiday spice” in it? I don’t know….

Standard
Uncategorized

Brief Update: Fluffernutter Sammie Stout and Railer’s Pale Ale

Railer's Pale Ale, floating whole Cascade hops.

Railer’s Pale Ale, floating whole Cascade hops.

Tried a bottle of the Fluffernutter Sammie Stout a couple of days ago. There was no head…like pouring a soda with no ice. It bubbled when pouring and immediately dissipated. The carbonation is better than last try, but could still be better. I’m hoping this isn’t the best it’s going to get, or I’m disappointed. Flavor is not bad, but would certainly be more enjoyable with head and a little more carb. Maybe I just need to try another established recipe, without doing anything “interesting” to it. I might just do better with an ESB.

The Railer’s Pale Ale is coming along nicely. The Wyeast II 1272 yeast has performed very well…nice krausen, but no need for a blow-off tube. At this point, I think fermentation is done; but I’m giving it a little more time. I may take a hydrometer sample soon to start the verification process. I’m hoping to be able to keg this beer, with equipment belonging to a friend, for the Railhawk’s Soktoberfest event September 10th. The whole Cascade hops are floating …at least some of them. I’m hoping they will drop, but either way, I’m planning to rack to another carboy, using a strainer bag on the siphon. I’m optimistic with this beer…as long as it isn’t too sweet…but it will be consumed.

I just wish I could pull off a good stout with a nice head.

Standard
Uncategorized

Brew Day: Railer’s Pale Ale

Brew in a Bag set up (BIAB)...draining the grains

Brew in a Bag set up (BIAB)…draining the grains

A friend recently asked if I would be interested in joining her in providing a homebrew for an event. The event is just prior to the local soccer team’s game. The team is the Carolina Railhawks, so I’m making a beer I’m calling Railer’s Pale Ale. Hopefully, my friend will be able to get my beer into a keg and we will set up beside each other to serve our beers. If the keg doesn’t work out, I can always bottle.

I used an online recipe building program, armed with a basic idea that I wanted to use some frozen, vacuum sealed Cascade hops for the bittering/background “canvas”, with a combination of Mosaic and Citra hops for flavor and aroma. The Mosaic add a resinous flavor and the Citra are, surprise! citrusy.

Cascade whole hops that had been vacuum sealed and frozen.

Cascade whole hops that had been vacuum sealed and frozen.

Starting the 60 minute boil with the Cascade hops.

Starting the 60 minute boil with the Cascade hops.

The base grain is an American 2-row. In playing with other grains to get the right alcohol ABV and the right color, I picked a few specialty grains. Then, after a little research, Wyeast American Ale II 1272 “smack pack” for the yeast. At the lower recommended temperature range, it is supposed to produce a clean, crisp result that accentuates the citrus componants. I went ahead and took the yeast out and activated it early on.

I put my recipe out for some fellow brewers to look at, but didn’t get any feedback before I had to go pick-up the ingredients. After I milled the grains and came home, I see a note from an experienced brewer who said I had too much specialty grain (28% of the grain bill) and should cut them in half and make up the difference with more 2-row. Ugh. The comment is that the beer will be too sweet. Well, I’m kind of stuck now. I can’t waste the time or money on buying more grain for a beer that is going to be given away. Ah, well. I hope that the hop selections will help counteract some of the sweetness that I’m being told is going to be there. At the very least, it will be beer, and it should be drinkable. Mine may not be picked by the fans as the best one there, but I’m not expecting to be in that group anyway…I’m probably the novice of the group.

So, without going through all the individual brew steps here, I’ll hit just a few points. The brew went pretty well as far as the step go. The mash temperature was overshot, as I usually do, not matter how careful I try to be. I used a little Culligan water, cold, to bring the temperature down into my target range. And flies and bees started showing up to check out the wort. Really got to be irritating! Otherwise, no problem with my little modified sparge or the boil.

My little modified sparge set-up.

My little modified sparge set-up.

I do need to note, that being a Liberal Arts guy, “brewhouse efficiency” and some of the more technical calculations in the process are pretty much a guessing game for me. I had the efficiency at 63% in the recipe, based on a previous brew that seemed fairly accurate. When I checked the specific gravity (SG) between the mash and the boil, I got 1.054. The post boil gravity was only supposed to be 1.052, so my efficiency was more like 71%. I adjusted it in the recipe, and the end result will be just a little higher alcohol content,,,but not crazy. It will still only be (estimated at this point) 5.15% ABV. That should be fine.

I chilled with an immersion coil. The tap water temperature is 71F, so I knew I wouldn’t get the wort down into the low 70’s.

Stainless steel coil immersion chiller in use.

Stainless steel coil immersion chiller in use.

I managed 83F and transferred to the carboy…started off using siphon, but the whole hops were a challenge and I wound up having to hand-pour about 1/3. A bit messy, but couldn’t be helped.

Siphoning wort into the carboy (on top of my little chest freezer converted to fermentation chamber.

Siphoning wort into the carboy (on top of my little chest freezer converted to fermentation chamber).

I put the wort in my fermentation chamber with an airlock installed, and placed the package of yeast in as well. I let the wort continue to cool for a few hours and then pitched the yeast.

After a couple of hours, I realized the temperature was a little low, so I turned the thermostat up a few degrees and left the lid up on the box to bring the temperture up for awhile. Six hours later, I see the slightest indication that the yeast may be active. A few hours later, I closed the lid to keep the temperature in the range I want, which would be around 65-68F. Now we wait to see if it really takes off…and how it turns out.

Update: 7/23/16    Checked on the progress around noon and we have a good fermentation in progress!

Success!

Success!

Standard