It’s been a long brew day. I slept late and got a late start. After getting an idea about what I was going to brew, running to the local brew shop, topping of the propane tank and getting ice, I still had to organize, set-up and sanitize! I think I finally turned the burner on at about 2 p.m. I just finished…well, still have some more clean up to do…and it’s 7:45 p.m.
I was hoping to make a scotch ale; however, the recipes and comments I was hearing were all pretty much saying that I needed to be able to maintain a fermentation temperature of 68F for the first week and sometimes down in the 50’s for another 10 days. Since I don’t have anyway of temperature regulation, I decided I needed to go another way. In looking at styles that do better in warmer temperatures, I found a recipe for a wheat beer, with an option for rye, that sounded interesting. So, I started tweaking it and headed for the HBS to get further input. The original recipe I found is here:
I always like to give credit to originator! So, here’s what I did. First, I went with regular wheat, not red. Maybe some other time. I also decided to pick up some Citra hops, because I really liked what they did for a similar brew. I also remembered that I had a little Vanguard hops left in the freezer at home. And rather than go with a Weihenstephaner yeast, I decided to go US-05. This should help with my higher fermentation temperatures. For the honey in the recipe, I opted for orange blossom and instead of Lemon Zinger Tea, I’m going for Lemon zest soaked in vodka for the secondary…maybe some orange zest, too. Maybe I’ll call it “Rye Sense of Humor American RyePA”.
On to the brew: I pretty much followed the recipe. There are two hops varieties in addition to the hops I decided to add. Bittering hops at 60 minutes, Cascade. Aroma hops at 30 minutes and 5 minutes, Hallertau and again at 5 minutes. I added the Vanguard at the 30 minute marks, as well and the citrus at flameout.
My BIAB process went pretty smoothly, except it is hard to nail down that target temperature and regulate it there. I heated the strike water to 168 (a tad higher than I anticipated). I let it come down a little before adding the grains. The grains only got it down to around 158F. I left the lid off and stirred a lot to try to bring it down to 152F. I went through that a couple time before it was ready to mash out.
The mash out, on the other hand, went smoothly. I hit the temp and I was able to maintain it pretty steadily for 15 minutes. Then it was on to the boil. I started with 7 gallons and went through most of the process as planned.
I did, however, have in my mind that the last two BIAB brews I did have a bunch of trub and tit really cut into the amount of beer I made. So, at the end, I added a gallon of cold water which, of course, dropped my specific gravity reading.
I decided to pull a gallon of wort and re-boil it with another 1/2 pound of honey and a 1-3/8 oz chunk of piloncillo (Mexican raw sugar). I chilled that down and added it back. The refractometer was reading 1.047…I did a hydrometer check and it was reading 1.050 at 73F…that would be 1.051 corrected for temperature. Anyway, I took one last refractometer reading and, low and behold, it matched the hydrometer at 1.051! I stuck the rest of the sample in the fridge to check the color later.
I had already rehydrated the yeast, so I went ahead and pitched it. Then I rocked the fermention bucket for 5 minutes to aerate. I’m going to go ahead and put a blow-off tube on this bucket, because it is pretty full. It would not take much krausen to foul an airlock!
Now it’s time to finish up a little cleaning before I yawn myself to sleep!
Update: Sample tube…clear separation. Lots of trub! I really like the flavor of this wort…this has great potential!