Uncategorized

Legends Never Die Saison Racked to Secondary

Racking Legengds Never Die Saison to secondary.

Racking Legengds Never Die Saison to secondary.

This is a very brief entry. I just need to document that I have racked the Legends Never Die Saison to Secondary. I racked it onto the vodka soaked zest of one grapefruit and the dry hop addition of 1 oz Nugget hops pellets in a little muslin bag.

Dry hop addition and grapefruit zest (and vodka.

Dry hop addition and grapefruit zest (and vodka.

IMG_20150513_105650265

 

The hydrometer puts it at an SG of 1.006, so that’s past where it was estimated to go (1.011).  So, even though mt OG was a little low,  my ABV is now a little ahead @ 6.83%. The sample flavor is pretty tasty, even before the additions. I hope this turns out as good as I think it could be!

Looks like 1.005. Correcting for temp =1.006

Looks like 1.005. Correcting for temp =1.006

Advertisements
Standard
Uncategorized

Brew Day! National Homebrew Day! Big Brew Event!

Let's Brew!

Let’s Brew!

Today was National Homebrew Day and I celebrated by brewing at Atlantic Brew Supply’s “Big Brew” event in the Raleigh Brewing Company’s brewery. The recipe I chose is a Saison called Legends Never Die and the 1/2 price deal came up to just over $15 for a 5 gallon recipe. As has been usual for awhile now, I used the Brew in a Bag (BIAB) method. The grain bill is North Carolina sourced, the yeast is Belle Saison, and the hops are an ounce of Cascade @20 minutes, a half ounce of Nugget @ 10 min and again @ 5 min. A final 1 ounce dry hop addition is done at secondary fermentation for 10 days.

Raleigh Brewing Company/Atlantic Brew Supply Big Brew

Raleigh Brewing Company/Atlantic Brew Supply Big Brew

The brewing process went pretty smoothly. The brewery hot water was already above 130F, so strike water reached temperature quickly. As usual, I went over my target temperature for mash in, but I added a little cold water and got it right within a few minutes.

My stuff.

My stuff

I did a mash-out this time to 172F for 10 minutes and sparged with 2 gallons of the brewery hot water.  When I was ready to boil, it seemed to be taking a little time, so I started making some notes…next thing I knew, I had a little boil-over. On the plus side, it provided a pretty clean break and I had a nice boil for the rest of the time.

Ready to boil

Ready to boil

I did get a little pop while stirring and got a mild burn on my right hand. It really only hurts when exposed to steam or warm water. I have found that stirring enough to create a whirlpool in the wort while it’s boiling, creates these pops of hot wort that can splash out of the kettle. I used my refractometer to check the specific gravity (SG) and is a little under the projected 1.063…I got 1.058. I’m good with that for my original gravity (OG). A friend had to add a pound of DME (Dry Malt Extract) to get to 1.060, so I don’t feel too bad.

After the boil, I used one of the brewery’s wort chillers and brought the temperature down to about 72F…took about 15 minutes or so. Then I siphoned the wort into my plastic carboy, aerated it with the oxygen cannister for about two minutes, and then pitched the yeast.

Done! Time for clean-up.

Done! Time for clean-up.

Clean up went pretty quickly and I strapped my carboy into my van for the trip home. Done! I arrived at the brewery at 9 a.m. and left right at 2 p.m. Five hours on the button.

Strapped in for the ride home. Click it or Tip it!

Strapped in for the ride home. Click it or Tip it!

I checked on the carboy around 7 p.m. and didn’t see much action, but it looked okay. An hour later, the krausen had literally created a layer on the top of the wort that was about a finger thick!

Belle Saison yeast is a monster!

Belle Saison yeast is a monster!

Time to install a blow-off set-up, before it fouls the airlock!

Blow-off set-up installed.

Blow-off set-up installed.

And it’s time for some Aleve. Happy National Homebrew Day!

Standard
Uncategorized

Belgo Paleo Moved to Secondary

BelgianPale

Tomorrow is a brewing event at my local homebrew shop (LHBS) and I’ve decided to participate and brew a saison with mostly North Carolina sourced ingredients.

North Carolina Water and Grain Bill. (A little harder to get NC yeaast and hops...this time.

North Carolina Water and Grain Bill. (A little harder to get NC yeast and hops…this time.)

So, I needed to rack the Belgo Paleo to secondary fermentation while I have an empty carboy. Then I needed to rack it back into the first carboy, so I could use the second one tomorrow. The reason is that the first carboy is glass and the second is plastic. The plastic one will be much easier to handle and transport.

Racking to plastic carboy. (Then back to glass, after cleaning.)

Racking to plastic carboy. (Then back to glass, after cleaning.)

I pulled a sample to check with the hydrometer and it looks like the same as my last sample: 1.017. I don’t think it’s going to go down anymore…1.009 is just not happening.

Hydrometer reading: 1.016? 1.017?

Hydrometer reading: 1.016? 1.017?

The taste is good, in my opinion, though. I will let it go a few days in secondary to see if fermenation kicks back up at all. Then I will go for the dry hop addition. Overall, I think we’re okay. The beer will be a bit lower ABV than projected, but that’s not a huge deal.

Update 5/3/15: Dry hop addition of 1 oz Saaz hop pellets are in. I sanitized a small muslin bag for the hops to go in and worked it into the carboy.

Update 5/7/15: Okay…so, the Belgo Paleo is in secondary and off the trub. Dry hops added 4 days ago…everything sanitized. Now, we have signs of additional fermentation. Bubbling in the airlock…not strong or frequent, but fairly regular. Signs also on the surface. Good thing I’m not in a hurry, but I have a lot going on over the next couple of weeks, including a nose surgery and recovery, so I guess this won’t get bottled until late May, if not sometime in June.*sigh*

Sanitized hops bag, surface action...what?

Sanitized hops bag, surface action…what?

Standard
Uncategorized

Day 142 Ginger Beer and Citra Belle Saison updates

I drew just a couple of ounces from the Citra Belle Saison…the flavor has approved since I racked to secondary on an ounce of Citra hops. Needs a couple more days…should bottle Sunday or Monday.

The ginger beer that I bottled previously hasn’t really taken off in the carbing department. In fact, I considered dumping the bottles back into the “second runnings” batch and combining them. However, I checked a bottle yesterday and it had a small amount of carb. Not much, but enough that I have decided to leave the bottles and watch them to see if/when they need to be pasteurized.

The “second runnings” batch is taking a long time to really get fermentation going. I had it off the heating pad for awhile. When the weather cleared, I gave it some time in the sun for a couple of days, but then the temp dropped, so I put it back on the heating pad and covered it with the space blanket and the fermentation picked back up. It’s coming along slowly, but today was the first time that I believe I detected alcohol in the aroma when I opened the lid. So, while a longer process than I anticipated, the plan remains as originally envisioned: virgin batch is to be non-alcoholic and the “second runnings” batch will be fermented out for an alcoholic version. No photos for this update…nothing really interesting to see,  just an update.

Additional update 8/16 10:15pm : I guess I was wrong on my second runnings ginger beer. I just took a SG reading and it looked like 1.066 when corrected for temperature and the OG was 1.062. So, either the the sugar is increasing in this bucket (not likely) or one of the measurements was off. I’m betting tonight’s measurement could be a tad off, due to some bits of ginger solids in the hydrometer sample. Would that affect it? I don’t know…seems like it might. At any rate. I’m thinking that there is no fermentation really going at it here, so I’m making an executive decision to add 1/8 teaspoon of dry Champagne yeast to the mix, after I strained it through cheesecloth and made sure I have at least a gallon of liquid left, which I do. With Champagne yeast at work, I will have to keep a close eye after I bottle it and definitely pasteurize; otherwise, the yeast won’t stop until it is bone dry and bottle bombs!

8/18…I had seen some activity with the addition of Champagne yeast to my Second Runnings Ginger Beer, but it seems to have stopped. I checked the temperature and it was over 100F. I guess a two gallon plastic bucket heats a lot more on a heating pad and wrapped in a space blanket than a 6 gallon glass carboy and I’m sure the yeast must be dead. I Googled and found “This strain tolerates fermentation temperatures ranging from 50° to 86°F….”.  So the plan is to get the temperature down and pitch the yeast again…and no additional heat. The house is usually around 74F this time of year. Still trying! And I missed buying bottles yesterday and the home brew shop is closed today. I guess my Citra Belle Saison is going to dry hop a little longer that anticipated.

Standard
Uncategorized

Day 139 Making Ginger Beer, Bottling Tepache, Checking Cherry Belle Citra Saison

Bottled Peach-Pineapple Tepache and a soda bottle to judge carbonation.

Bottled Peach-Pineapple Tepache and a soda bottle to judge carbonation.

Tonight, I knocked out a couple little projects and checked up on one. My micro batch of Cherry Belle Citra Saison has a pretty color from the cherries and I think they’ve given up all they really have to offer. I’m going to rack this brew to tertiary tomorrow to settle for a few days before bottling.

A peek at micro batch Cherry Belle Citra Saison.

A peek at micro batch Cherry Belle Citra Saison.

I went ahead and strained my peach-pineapple tepache…it had a bubbly pellicle covering the surface. I siphoned out from under the surface and through a few layers of cheesecloth. I’m not sure it was necessary, but I feel good about it. The flavor is really nice. It’s sweet and tangy and the spice is coming through nicely.

Peach-Pineapple Tepache sample...sweet. tangy, spiced...good stuff!

Peach-Pineapple Tepache sample…sweet. tangy, spiced…good stuff!

The SG is 1.041 and I feel like it’s time for bottling. So I got that done and filled a soda bottle for carb testing. If it goes like I’m anticipating, I should be pasteurizing Monday morning (about 36 hours).

My other project for tonight was peeling a pound of fresh ginger,

A pound of fresh ginger, skin scraped off.

A pound of fresh ginger, skin scraped off.

 

shredding it in the food processor,

DSC05243

Shredded fresh ginger.

and starting a non-alcoholic ginger beer for my brother in-law who is from Trinidad. I’m using a recipe from a cookbook he brought from Trinidad and it looks very similar to tepache, except it uses freshly grated ginger instead of pineapple skins. Here is the recipe:

Ginger Beer

1 lb fresh ginger, skin scraped off with a spoon, grated

8 cups water

Juice and zest from 1 lime

4 cups granulated sugar

1 stick cinnamon

4 to 6 cloves, whole

Directions: (I have adapted for my bottling procedure) Combine all ingredients in a 2 gallon fermentation bucket and stir to start sugar dissolving.

Ingredients in the fermentation bucket.

Ingredients in the fermentation bucket.

Seal lid and install an airlock. Place in direct sunlight for 1 day. (We are having rain, so I’m putting the bucket on a heating pad overnight and most of tomorrow.) Next day, strain. I assume that this would become alcoholic, if I allowed it to ferment longer, but that’s not the plan for this batch. Sweeten to taste, if necessary. Bottle. (I’m going to top off to a gallon with fresh bottled water to extend the batch a little.) Fill a soda bottle to use for judging carbonation progress. It should take a day or two. Pasteurize and store in a cool, dark place and refrigerate before opening. (Open over a sink or outside just to be safe!)

Standard
Uncategorized

Day 134 Status Citra Saisons and Diet Root Beer

Switched back from blow-offs to airlocks

Switched back from blow-offs to airlocks

A quick update on my current projects: 1) Diet Root Beer. I prepared a replacement cap for my test bottle, I opened the tester and heard a slight CO2 escape. I poured a very small amount in a glass. There were very few bubbles. The soda was obviously undercarbed, but had some…hopefully, that will continue to increase! The flavor was strong on the root beer and not overly sweet, but it does have a little “diet” aftertaste. It’s okay, though, for the trade-off on sugar. I’m just hoping it carbs enough! Next time, maybe a little sweeter. I may have to find a way for a little more sweetness and a little less aftertaste without upping the sugar too much.

2) I switched back to regular airlocks for the Citra Saisons this afternoon. The action seemed to have relaxed sufficiently. Still on the heating pad on “low”  and wrapped in the Space Blanket. The main batch is bubbling about every 8-10 seconds and the little bonus gallon, that I’m going to rack onto vodka soaked cherries, is at about 18-20 second intervals. Looking good! A lot of trub…I’ll probably get 4-1/2 to 5 gallons out of the big carboy and 2/3 gallon on the small one, but they should be good!

3) Moving the Hi-Nelson Saison w/Hibiscus to storage. They were bottled on July 27th. Should be a couple of weeks before I open one and a month before I expect them to really be ready.

Standard
Uncategorized

Day 133 Brew Day! Citra Saison with Harvested Yeast Starter

Setting up for brewing

Setting up for brewing

This was an uncharacteristic brew day for me. I usually don’t brew on weekdays. Certainly not Mondays. But the starter I had hoped to pitch in a Citra Saison pushed me back a day. I have never harvested yeast and never made a starter before now and I was afraid that the starter was going to be too weak. I worked out a boost for the starter (see previous post) and moved the brew back a day.

After I got everything all set up and ready to go, I got my BIAB (Brew In A Bag) in place and heated my strike water, 6 gallons.  The goal was 150F…water went to 154F and I mashed in. The water only dropped 1/2 degree though. I turned off the heat and made a run for ice. When I returned, the temp was 150.2F. Over the next 45 minutes, I tried my best to maintain the target temperature of 150F; however, it was probably more consistently in the 153F range.

After the BIAB (Boil In A Bag) steep and "sparge"

After the BIAB (Boil In A Bag) steep and “sparge”

Here is where I will talk about my changes to the original recipe that I found online. First of all, I decided to do Pale Malt 2 row, instead of Pilsner. Two reasons: sale on Pale and 60 minute boil instead of 90 minute. (Some recommend Pilsner boil for 90 to reduce chance of off flavors.) Next, I added 1 teaspoon of Irish Moss at 15 minutes left in the boil to aid clarity. I also realized that I had forgotten to buy 1 pound of Belgian Clear Candi Syrup…made a run to the closest brew shop, only to find that they are closed on Mondays. Aaaargh! So, I substituted a pound of raw North Carolina honey, instead (at 10 minutes left in the boil). I am also planning on adding a dry hop step to secondary. The recipe calls for Citra hops to be added 1/2 oz at 30 minutes and 1/2 oz at 10 minutes left in the boil. I am a big Citra fan, so I am going to add an ounce in secondary.

Okay, back to the procedures: After the 1 hour mash in, I did my usual “tea bag” style dunking and draining of the bag, using a large pizza screen over the pot for support. I then set up a bottling bucket with 2 gallons of sparge water at about 150F and used the spigot with some hose on it to do an improvised sparge. I’ve used this method that, as far as I know, I made up, a few times and I think it helps a little. This left me with a rather full kettle, so the boil was a challenge and had to be monitored pretty carefully.

The pizza screen was helpful in the tea bag style sparging and in helping keep bugs and debris out.

The pizza screen was helpful in the tea bag style sparging and in helping keep bugs and debris out.

I set timers for my additions and all of that went well. Did my usual ice bath chill and managed to get the temperature of the wort down to about 90F, pretty quickly…good temperature for Belle Saison yeast.

Now, I wanted to use my glass carboy for primary fermentation, so I could have a visual on activity. The problem is getting 7 gallons of wort from a stock pot into a heavy glass 6 gallon carboy using a funnel. I struggled and spilled a bit, trying to figure out a grip and pouring into a small target that filled quickly. I could see that wasn’t going to cut it, so I poured about 3/4 of the wort into the bottling bucket I had used for the sparging, and then went through the spigot and hose into the carboy. Obviously, I was going to have too much wort, so, rather than toss it, I grabbed and sanitized a one gallon carboy and put the rest of the wort into it.

I used my oxygen tank to oxygenate the big carboy for two minutes and the little one for one minute. Between the refractometer reading of 1.048 and the hydrometer reading, corrected for temperature to 1.044, I’m  going to estimate 1.046 OG.* Rather than try to decant my yeast starter, I decided to swirl the flask to mix it well and pitch the whole thing…guesstimating some for the smaller batch. The starter wort used pale DME (Dry Malt Extract), so it shouldn’t hurt the flavor of the beer. The recipe doesn’t give a projected FG, but Belle Saison is pretty aggressive, so I’m betting on around 1.002 for the big batch. So, maybe a 5.78% ABV? I would be happy with that.

Here's the volume of wort I wound up with.

Here’s the volume of wort I wound up with and my flask of starter yeast.

I have no clue what to expect for the one gallon batch, because I’m going to add one pound of fresh cherries to secondary fermentation, rather than dry hopping it, and the sugar in the cherries will surely kick fermentation back into gear. I currently have the whole cherries in the freezer with some vodka. When it comes time to rack the small batch, I’ll crush the cherries into the vodka a little to release some juice and add it all. I’ll probably use a 2 gallon bucket that I use for ciders to do the small batch secondary, so I have a wide opening with which to work.

The recipe calls for a week each for both primary and secondary; however, my Hi-Nelson Saison needed a little over two weeks for primary and then a week for secondary. And the small batch may go longer in secondary. I’ll probably even rack the small batch to a tertiary stage to clarify once it’s off the fruit. Probably back into a glass carboy again so I can judge the clarity.

The big question mark is whether my yeast starter was going to work. The yeast was pitched at 3:15 p.m. and the carboys were set on a heating pad, on the lowest setting. At 6:30, there was no activity evident and the glass felt pretty cool.

Carboys on the heating pad.

Carboys on the heating pad. (Beside some Hi-Nelson Saison with Hibiscus and some Diet Root Beer (Truvia)

I upped the heating pad to medium and wrapped the carboys in a “Space Blanket”. By 9:30 p.m., they were both chugging along in the airlocks…not violently, but good, frequent bubbles every second or two. Success!!! Woo hoo!!!

Heating pad AND Space Blanket...now we're chugging!

Heating pad AND Space Blanket…now we’re chugging!

I cold crashed the hydrometer sample just to see what it looks like and how it tastes at this stage. Obviously malty and sweet at this point, but it seems like it will be nice and clean, light bitterness and the hops should shine through on the main batch and the Belle Saison should add a little spice and funk. The little cherry batch should be really interesting!

Hydrometer sample, cold crashed and easier to get a read. And a taste for evaluation.

Hydrometer sample, cold crashed and easier to get a read. And a taste for evaluation.

*I also let this sample come to room temperature and took another hydrometer reading. at 74.2F and 1.046, adjusted to 1.047, so that will be my new OG to go with. I read the hydrometer with no contacts or glasses and it was much easier to get a good read, so I feel confident with that figure. (An additional refractometer reading, of course, calls it 1.048, so…whatever!) Could be around 6% ABV…anywhere in that  5.75 to 6.05% range is close enough.

For the original version of the recipe, go to this link or cut and paste into your browser:

http://www.danielshomebrew.blogspot.com/2014/01/citra-saison.html

Always give credit where due!

Update: Okay…the following morning, the airlocks were fouled. I quickly set up blow offs and the yeast is going at it, big time! Definitely had enough yeast!

 

Standard