Uncategorized

Belgo Paleo Moved to Secondary

BelgianPale

Tomorrow is a brewing event at my local homebrew shop (LHBS) and I’ve decided to participate and brew a saison with mostly North Carolina sourced ingredients.

North Carolina Water and Grain Bill. (A little harder to get NC yeaast and hops...this time.

North Carolina Water and Grain Bill. (A little harder to get NC yeast and hops…this time.)

So, I needed to rack the Belgo Paleo to secondary fermentation while I have an empty carboy. Then I needed to rack it back into the first carboy, so I could use the second one tomorrow. The reason is that the first carboy is glass and the second is plastic. The plastic one will be much easier to handle and transport.

Racking to plastic carboy. (Then back to glass, after cleaning.)

Racking to plastic carboy. (Then back to glass, after cleaning.)

I pulled a sample to check with the hydrometer and it looks like the same as my last sample: 1.017. I don’t think it’s going to go down anymore…1.009 is just not happening.

Hydrometer reading: 1.016? 1.017?

Hydrometer reading: 1.016? 1.017?

The taste is good, in my opinion, though. I will let it go a few days in secondary to see if fermenation kicks back up at all. Then I will go for the dry hop addition. Overall, I think we’re okay. The beer will be a bit lower ABV than projected, but that’s not a huge deal.

Update 5/3/15: Dry hop addition of 1 oz Saaz hop pellets are in. I sanitized a small muslin bag for the hops to go in and worked it into the carboy.

Update 5/7/15: Okay…so, the Belgo Paleo is in secondary and off the trub. Dry hops added 4 days ago…everything sanitized. Now, we have signs of additional fermentation. Bubbling in the airlock…not strong or frequent, but fairly regular. Signs also on the surface. Good thing I’m not in a hurry, but I have a lot going on over the next couple of weeks, including a nose surgery and recovery, so I guess this won’t get bottled until late May, if not sometime in June.*sigh*

Sanitized hops bag, surface action...what?

Sanitized hops bag, surface action…what?

Standard
Uncategorized

Racking Steinpilz Gose to Secondary Fermentation

Time to rack the gose.

Time to rack the gose.

 

The Steinpilz Gose has slowed way down on the airlock bubbling. I don’t want the porcini mushrooms to rot, so I’m racking to secondary, to finish fermentation without the mushrooms and trub.

Chunk of floating 'shroom. Trub, Time to rack!

Chunk of floating ‘shroom. Trub, Time to rack!

The specific gravity is down to 1.015 and the target is 1.011, so it doesn’t have far to go, but, again, I’m not going to rush it. I still need to get my carbonation issues under control.

Speaking of the carbonation issues, I did my primary fermentation in my glass carboy, instead of my plastic bottling bucket. I also bought a new hose for the racking process and racked to a plastic carboy…a “Bubbler” by Northern Brewer, that was given to me by a brewer friend who doesn’t use it anymore.

Racked to a plastick Bubbler for secondary fermentation.

Racked to a plastick Bubbler for secondary fermentation.

Everything was well-washed and sanitized. I’m hoping for the best when I bottle, but my friend is going to keg a couple of gallons for comparison. I’ve never kegged before, so that’s kind of exciting!

Back to today’s process: everything went smoothly and I wound up with just under 5 gallons. I took a hydrometer sample, as mentioned above and it looked good. I tasted the sample and I think it’s good.IMG_20150228_170311015

1.014 @ 68F = 1.015 SG

1.014 @ 68F = 1.015 SG

I taste the mushroom, but it’s not overpowering. I don’t think the mushroom tea at bottling step will be necessary; but it might need more salt. The original gravity was 1.054 and the current SG of 1.015 puts the ABV at a little over 5%. It should finish around 5.25% ABV. I’m going to let the Gose go for at least 10 days in secondary…maybe 2 or 3 weeks. Maybe a week in tertiary…we’ll see. Right now, I’m feeling pretty good about it. Cheers!

Standard
Uncategorized

Happy New Year! Racking Yooper’s Oatmeal Stout and Washing Yeast

 

Racking Yooper's Oatmeal Stout

Racking Yooper’s Oatmeal Stout

I have racked Yooper’s Oatmeal Stout into two separate buckets to finish. First I racked it all into a bottling bucket, leaving the trub behind. Then I racked 2 gallons of that onto the gingerbread flavoring…and that smelled AWESOME!!!

Racking 2 gallons onto the gingerbread flavoring.

Racking 2 gallons onto the gingerbread flavoring.

Gingerbread flavored vodka base.

Gingerbread flavored vodka base.

 

That left a little less than 3-1/2 gallons plain…I’m calling in 3.3 gallons. The hydromenter reading is 1.019, after correction for temperature, which is slightly higher than where it is projected to finish, but it started a little bit higher, as well.

Hydrometer reading.

Hydrometer reading.

Should be in good shape. The color and flavor seem to be good. Looking forward to the finished product!

I’m about to start the process to wash the yeast and harvest it. If the yeasts I’ve tried in my little cider project don’t do the job, I might use some of the yeast from this batch of stout. Otherwise, I store it in the refrigerator and see if I can find a use for it soon.

 

 

 

 

 

 

Update 1/2/15: I pitched the yeast from the little starter I was attempting into my 1/2 gallon batch of cider…waiting for signs of renewed fermentation. I might transfer to a larger container and add more cider…maybe.

Drained liquid from yeast washing project (British Ale II from Wyeast) and tranferred the yeast to my flask and added Culligan bottled water.

Update 1/3/15: Tonight, I poured off the liquid for the second time on the Wyeast British Ale II in the washing process. I also made a starter wort in my flask, 800 ml water and 1/4 cup of DME. The SG was only around 1.020, so I added some white sugar and bumped it up to around 1.040 (DME is messy, trying to get it into a flask opening). I chilled the wort to about 70F and poured the harvested yeast into the flask. I’m going to grow the volume on the yeast in the starter and then crash it and store it in the refrigerator until needed. I probably won’t have another brew day for  a few weeks and haven’t decided what it might be yet, much less what yeast I’ll be needing.

Anyway, the starter is pitched and underway.

Standard
Uncategorized

After Christmas Update on Yooper’s Oatmeal Stout

Well, had a great Christmas! No wort chiller, though. I guess I’ll be doing ice baths until my birthday! I did get an attachment to my KitchenAid mixer that juices stuff, so maybe it will help with ciders? Definitely will be usefull for sauces and jams/jellies.

So, Yooper’s Oatmeal Stout chugged for a few days. It never hit the blow-off tube, but was working away nicely. It’s pretty quiet now, so I’m switching out the tube for a regular airlock. I’m thinking that this batch will be in primary another week and then I’ll go to secondary. I’ve started the supplies for the 2 gallon gingerbread  to get them in the refrigerator, so the gingerbread spices will have time to sanitize in the vodka and the vodka will have a chance to extract some of the flavors.  I have combined the following:

1 tsp. powdered cinnamon

1 tsp. powdered ginger

1/2 a fat Madagascar Bourbon vanilla bean, split and scraped (seeds and pod added)

15 grams fresh ginger root, peeled, grated (weight after grated)

50 grams unsulfered molasses

1/2 cup vodka

Wow. Very definite gingerbread flavor! Now, if I guessed an appropriate amount for 2 gallons of beer, it should be really good!

Because I’ll be introducing a little molasses, the fermentation will likely start back up briefly and a small increase is alcohol will happen, between fermentation and the vodka. It probably won’t be much, but it will be interesting to see.

I also have a little 1/2 gallon batch of cider going. It has stopped fermenting and settled. I’ll rack that sometime in the next few days and let it finish clearing…or will I add something to flavor it? We’ll see. Only a couple of dollars in it.

 

Standard
Uncategorized

Day 169 Racking the Eastern Cascade Waterfall Amber (Hops Experiment)

Trub in the bottom of primary fermentation bucket after racking.

Trub in the bottom of primary fermentation bucket after racking.

It’s Sunday and the Eastern Cascade Waterfall American Amber has slowed way down on fermentation action, so I racked to secondary. The hops experiment continues. I used 1/2 oz fresh Cascade hops that were vacuum sealed in jars and frozen…that went in the thirty minute boil at the beginning. Then, I added 1 oz fresh Cascade hops that partially dried on the bines and finished drying in my attic at the 15 minute point. Now, I’ve added another ounce of the dried ones to secondary for dry hopping.

Racked onto 1 oz dried Cascade hops.

Racked onto 1 oz dried Cascade hops.

I’m anticipating a 5 day dry hop and either bottling or racking and another couple of days to settle. I’ll make that decision after the dry hop.

I took a sample to check the specific gravity (SG) and the reading was 1.014 at 68.2 F, so it would be 1.015 after adjustment for temperature.

Hydrometer sample.

Hydrometer sample.

That is exactly the estimated FG for the recipe. The color looks good…nothing off in the aroma. I refrigerated the sample to settle and chill and I’ll try it again later, but the initial sip of the sample seems pretty good. I’m not expecting a WOW! beer from a mostly DME brew (dry malt extract), but it seems pretty good.

Standard
Uncategorized

Day 164 Racking McQuinn’s Robust Porter to Secondary

 

DSC05904

Setting up to rack 1 gallon jug plus about 6 gallons in the bucket to the big glass carboy.

It has been just past a week in primary fermentation for McQuinn’s Robust Porter. Activity really seemed to dive after just a few days, but I gave it a week anyway. It looks pretty good…nice color and decent clarity.

McQuinn's Robust Porter, ready to rack.

McQuinn’s Robust Porter, ready to rack.

I’ll see how it settles in Secondary. It may not need very long. The hydrometer sample I collected puts the SG at 1.010 at 73.6F, corrected=1.011; the recipe projected the final at 1.015, so I’m already beyond that.

Hydrometer sample

Hydrometer sample

A little taste is nice and roasty. I think it’s good, but I don’t have enough experience with porters to really know what I’ve got. It might just be mediocre. Eventually, I’ll get some reviews. For now, I’ll just keep on rolling.

Wound up with 5-1/2 gallons in secondary.

Wound up with 5-1/2 gallons in secondary.

Now I need to see if I want to try and harvest the Mangrove Jack’s British Ale Yeast. It certainly seems to be a quick and effective bunch of critters!

Standard
Uncategorized

Day 157 Racking Scottish Samhain Pumpkin Ale to Secondary

Racking from the fermentation bucket to a glass carboy.

Racking from the fermentation bucket to a glass carboy.

The Scottish pumpkin ale has been transferred to secondary. I really need to mark my carboy, so I can be accurate with volumes, but it looks like I left a little less than a gallon in the primary bucket and I started with about six; so, I’m approximating 5.25 gallons in secondary. I added another can of pumpkin (roasted), a vodka soaked vanilla bean and another 2 tablespoons of the pumpkin pie spice blend to the carboy and racked the beer onto it.

Added the spice blend to the vodka and vanilla bean.

Added the spice blend to the vodka and vanilla bean.

Vanilla bean soaked in vodka for a week and pumpkin pie spice.

Vanilla bean soaked in vodka for a week and pumpkin pie spice.

It was a bit of a challenge getting the pumpkin into the carboy without making a mess. I put it into a Ziploc baggie and clipped on corner and squeezed it in.

Roasted canned pumpkin. Gathering it up to put in a baggie.

Roasted canned pumpkin. Gathering it up to put in a baggie.

Canned pumpkin, spread on parchment paper for roasting.

Canned pumpkin, spread on parchment paper for roasting.

With the volume of additions, once I’m done fermenting, I’ll probably come up a little under 5 gallons, but pretty close. There’s enough alcohol that I could top it off, if I want to.

I took a hydrometer sample and got a reading of 1.028 @ 76.4 F, which is 1.030 corrected for temperature.

Hydrometer sample.

Hydromter sample.

Currently 7.09% ABV, before secondary additions. Good color…seems like flavor is good, but I’m glad I’m adding more spices. I’ll taste the hydrometer sample again later (in the fridge) and see what the color looks like when it clears. The carboy has settled quite a bit already and looks nice.

Carboy secondary a few minutes after racking.

Carboy secondary a few minutes after racking.

I hope those flavors I added blend in well. Still pretty psyched about this beer!

Now that I’ve freed up a bucket, I may go ahead and rack the crab apple/Cripps& Ginger Gold apples, and pear cider to secondary. I’ll look into that tomorrow. I did take a small sample from the spigot on the bucket and it is very “green” tasting with a tannic astringency on the tongue. I’ll probably have to either back sweeten this on and pasteurize it after an extended bulk conditioning.

Standard