Uncategorized

Brief Update: Fluffernutter Sammie Stout and Railer’s Pale Ale

Railer's Pale Ale, floating whole Cascade hops.

Railer’s Pale Ale, floating whole Cascade hops.

Tried a bottle of the Fluffernutter Sammie Stout a couple of days ago. There was no head…like pouring a soda with no ice. It bubbled when pouring and immediately dissipated. The carbonation is better than last try, but could still be better. I’m hoping this isn’t the best it’s going to get, or I’m disappointed. Flavor is not bad, but would certainly be more enjoyable with head and a little more carb. Maybe I just need to try another established recipe, without doing anything “interesting” to it. I might just do better with an ESB.

The Railer’s Pale Ale is coming along nicely. The Wyeast II 1272 yeast has performed very well…nice krausen, but no need for a blow-off tube. At this point, I think fermentation is done; but I’m giving it a little more time. I may take a hydrometer sample soon to start the verification process. I’m hoping to be able to keg this beer, with equipment belonging to a friend, for the Railhawk’s Soktoberfest event September 10th. The whole Cascade hops are floating …at least some of them. I’m hoping they will drop, but either way, I’m planning to rack to another carboy, using a strainer bag on the siphon. I’m optimistic with this beer…as long as it isn’t too sweet…but it will be consumed.

I just wish I could pull off a good stout with a nice head.

Standard
Uncategorized

Racking Fluffernutter Sammie Stout to Secondary

Racking the Fluffernutter Sammie Stout.

Racking the Fluffernutter Sammie Stout.

It’s Memorial Day…respect to all who served. I racked my Fluffernutter Sammie Stout to secondary fermentation today. I began by cleaning and sanitizing a carboy and adding my Everclear-soaked vanilla beans to it. Then, I brought a gallon of water to boil and whisked in 2 packages of peanut butter powder, 6.5 oz each, JIF brand. I boiled the peanut water for 10 minutes and then cooled it in a water and ice bath. Once down to about 73 F, I poured it through a sanitized funnel, into the carboy. Next, using a siphon and tube, I racked the beer onto the peanut water and vanilla beans.

I left most of the original trub behind, and wound up with 5-1/2 gallons in the secondary carboy.

5-1/2 gallons into secondary fermentation.

5-1/2 gallons into secondary fermentation.

I took a hydrometer sample after racking and came up with a current SG of  1.031. (Adjusted for sample temperature of about 70 F.) I’m still guessing it may go down to 1.028, but we will see where it is after 10 more days and monitor it from there, to determine when it is ready to bottle.

Hydrometer sample, trub from primary fermentation.

Hydrometer sample,  trub left in primary fermentation.

The color looks nice. The flavor is obviously “in your face” peanut right now. Hopefully, the vanilla will bloom and the peanut will tone down, as anticipated. I may have to up the vanilla, though…possible some extract at bottling. I’ll have to make a judgement call later. So, back into the fermentation chamber…which has been working out very nicely!

Standard
Uncategorized

Fluffernutter Sammie Stout Update

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Fluffernutter Sammie Stout, out of the fermentation chamber briefly to ease the temp up a bit.

Update 5/24/2016: An unexpected little run of cooler temperatures had me worried that the beer was not fermenting. I know it did for a couple of days, albeit a bit slowly…never really started “chugging”, but going. Then the cool weather, and my little fermentation chamber is outside. It is only able to cool, not warm, so this could be a problem. Since the overnight low last night was going into the mid to lower 50’s, I decided to bring the carboy inside.

I took a sample and did a temperature and hydrometer reading. The temp was 62.5, so it wasn’t terrible…a little under optimum range, but should not be low enough to have caused any harm. The hydrometer has the specific gravity at 1.030, so it definitely was fermenting. That’s good! Adjusting for the lactose, I think it will likely only go to 1.028 or so.

Hydrometer sample for evaluation...specific gravity, temperature and flavor.

Hydrometer sample for evaluation…specific gravity, temperature and flavor.

The flavor of the sample has my hopes up! The color may be a tad light, but it’s a little darker than the sample shows, because of the camera flash and the particles had not settled out yet. I could definitely taste the peanut flavor, especially in the finish. Nice malty sweetness. After the sample chilled overnight, the peanut flavor is more muted. With that and the consensus from others that the peanut flavor will start fading after a couple of months in the bottles, I do plan to add more peanut powder to secondary via boiling it with water and cooling it…probably a gallon and then racking onto it and the vanilla beans. I’m going to skip the marshmallow Fluff in secondary and rely on the vanilla for that flavor, so I’m not adding much more fermentable sugars. I may try adding some to the boil in a future batch, but not this time. I have a feeling that this beer’s flavor will improve as it loses some of its chill, after pouring.

The temperature on the carboy strip thermometer reads around 66-68F, so I’ll be putting it back in the fermentation chamber later today.

Standard
Uncategorized

Brew Day: Fluffernutter Sammie Stout

Set up to brew.

Set up to brew.

 

Finally! For the first time in 7 months, I brewed some beer! I created this recipe months ago and tweaked it some, but just didn’t want to brew again until I was able to control my fermentation temperatures. I have had ongoing issues with over-carbonation and I have had some off-flavors, particularly with darker beers…some are metallic or just very one dimensional. I have addressed everything I can, except fermentation temperature and yeast selection. For this sweet stout, I decided to go with Wyeast 1968. Optimal temperature range is around 64 to 70F. So, instead of my normal household room temperature of around 72F, with wort temps reaching 75 to 78, I now have a small chest freezer with controls to regulate the temperature. I have it set at 63-64F. I’m hoping this will at least help the flavor of the beer. If it helps with the carbonation issue, too, then that would be awesome!

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

Small chest freezer. Perfect fit for a single carboy and a blow-off container.

http://www.brewersfriend.com/homebrew/recipe/view/295261/fluffernutter-sammie-stout

I did have to make some minor changes based on homebrew shop ingredients availability…nothing major. Brew day went very smoothly, except for mash temperature climbing to 160F, instead of 155F. With about 25 minutes left, I removed the insulation/lid and started stirring to lower the temperature. With 10 minutes left, it was down to 156-157.

Brew in a bag...the "mash in".

Brew in a bag…the “mash in”.

My understanding is that the effect would be less fermentable sugars and possibly a little sweeter finish. I also added lactose with 10 minutes left in the boil. The end of the boil was fine, except the OG was high. I have a feeling that the lactose is not figured into the refractometer/hydrometer readings, because otherwise, it looks fine.

The boil is done.

The boil is done.

As a result of being able to drop the temperature to 71-72F, pitch the yeast and drop the carboy in a 64F fermentation chamber, the “take-off” for the yeast was barely noticeable 20 hours later. There was just a ring of bubbles around the top inside of the carboy. Now, at about 26 hours, there is audible bubbling and more visible signs of fermentation.

Controls to convert the freezer to a fermentation chamber.

Controls to convert the freezer to a fermentation chamber.

My concerns, at this point, are whether or not I added enough peanut powder to be noticeable in the final product, and if the vanilla planned for secondary will give the marshmallow flavor. A couple little sips of the wort towards the end of the boil did not really convince me on the peanut powder…and what IS marshmallow flavor? Marshmallows are basically corn syrup, sugar, gelatin, and vanilla. I’ll investigate some more and see if peanut powder can be effectively added during primary or secondary fermentation, as well as exploring the marshmallow flavor a bit more. If I make changes, I will definitely update the recipe. For tonight, it’s reading, while the fermentation builds.

 

 

Standard
Uncategorized

Day 87 Racked Costa Kona Mocha Latte Stout to Secondary

End of primary fermentation for the Costa Kona Mocha Latte Stout.

End of primary fermentation for the Costa Kona Mocha Latte Stout.

It’s time. Racked the Costa Kona Mocha Latte Stout onto the Costa Rican cocoa nibs that I have had soaking in vodka for a few days, after I toasted them briefly to bring out the flavors. The primary bucket had a bunch of coagulated looking trub that looked like browned hamburger in grease.

Cocoa nibs in a sanitizing/extracting  soak in vodka

Cocoa nibs in a sanitizing/extracting
soak in vodka

Is that hamburger? Nope...that's some serious trub.

Is that hamburger? Nope…that’s some serious trub.

But the beer is coming along nicely, I believe. Secondary should go a week or so and then it will be on to bottling with the cold brewed Kona blend coffee concentrate (4 cups).

I’m a bit bugged by a little mystery. I keep an inventory of what I have on hand in brews. Last night, I pulled a few things to refrigerate and drink and I adjusted my inventory. I looked in the fridge tonight and found a bottle I thought I had drunk last night. I checked my inventory and it is accurate. What I  have left in the fridge is accurate, except for this extra bottle. So, what the heck was that bottle I drank? I have this single bottle of a strawberry lemon experiment that I did. I also did one that was just lemon. I didn’t even put them in the journal, because they were just single bottles. It was fresh lemon juice, water, sugar and a little yeast. I somehow had some small amount of strawberry for the second bottle…can’t even remember now. I thought I drank the strawberry one last night. It was weird because it was kinda crazy carbed…DSC04348

crazy carb on this mystery bottle.

crazy carb on this mystery bottle.

and heavier on the strawberry than I expected. I also thought I was getting some hops, which I did not use on this cider-like fermentation. If I didn’t know better, I would think that I had opened a strawberry blonde that I just bottled a couple of days before…but they’re all accounted for…unless I had a brain fart and stuck one in the fridge when I was bottling or put one back in the inventory stuff without counting it. Anyway, it’s a mystery…but I have the strawberry lemon experiment right here. It’s clear, light golden and lemony, but dry with a fairly strong sparkle. Clean and fresh.

Strawberry Lemon Experiment

Strawberry Lemon Experiment

Not getting the strawberry, but it doesn’t really suffer without it. I really should have documented this, even though it was a tiny experiment. Ah well…live and learn. Relax…and have a home brew (or ferment)!

Standard
Uncategorized

Day 82 Working Out Details on Costa Cocoa Milk Stout

I got this kit for my birthday. I’ve never used a couple of the ingredients in this recipe before…Costa Rican cocoa husks & cocoa nibs, and lactose (milk sugar). Sounds good, though! While doing some reading, I came across information regarding hazelnut extract…I’m thinking Nutella Stout. After mulling it over a bit, I decided to skip the trip to the brew shop for the extract because I thought it might just get to be too sweet and might not taste natural.

After some more thought…and realizing that I had a bunch of whole bean coffee on hand that I got on sale…I started looking into using coffee as an additional ingredient. Natural, not adding more sweetness, adding caffeine and making this recipe a “mocha”. Yup. That’ll do! So, I sent a message to some local brewery people for advice. They suggested making a cold brew coffee concentrate and using about an 8% by volume at bottling. I never would have thought of that! I’m actually going to go about 4 cups of concentrate, rather than 6 cups…I can always add more, but I want the chocolate to still come through.

Everthing sanitized! Coarsely ground Kona blend coffee going into Culligan water for 15 hours.

Everthing sanitized! Coarsely ground Kona blend coffee going into Culligan water for 15 hours.

I found a cold brew coffee recipe online from Bon Apetite  (giving credit, where due!). I adapted it to brew in a gallon carboy with an airlock, instead of some other container covered with cheesecloth. I coarsely ground 12 oz of Kona blend coffee and added it to a sanitized carboy and capped it.

Ready to cap it and swirl it.

Ready to cap it and swirl it.

Shook it up and swirled to get as much of the grounds off of the bottle as I could and then replaced the cap with a sanitized  airlock. After 15 hours at room temperature, I’ll strain out the grounds and then filter the liquid through multiple layers of cheesecloth. (If I were concerned about it being crystal clear, I would filter it through a coffee filter…slowly. I think going through a sieve and then through thick cheesecloth will be fine.) I am going to use a teaspoon of Irish moss in the boil, just to help the beer clear a little, but I’m not expecting to see through it…it IS stout, after all.

Brewing...of a different kind!

Brewing…of a different kind!

So, what I’ll be brewing will be a “Costa Kona Mocha Milk Stout”. I’m sure I’ll be sampling it as soon as I can, but I think this one might need to age until next December-ish. I think the caps that came with the kit are the “oxygen absorbing” kind…good for longer storage. Brew Day tomorrow, if I can fit it in!

Standard